Biomedical Engineering Reference
In-Depth Information
[26] M.R. Meyer, R.A. Latour, H.D. Shutte, Long-
term durability of fibre/matrix interfacial
bonding in hygrothermal environments,
Composite squeeze forming, a new technology
to process endless fibre reinforced thermo-
plastics, in: Proceedings SAMPE, Paris, April
1999.
[34] K.A. Jokish, S.A. Brown, T.W. Bauer,
K. Merritt, Biological response to chopped
carbon fibre reinforced PEEK, J. Biomed. Mater.
Res. 26 (1992) 133
e
146.
[35] C. Morrison, R. Macnair, C. MacDonald,
A. Wykman, I. Goldie, M.H. Grant, In vitro
biocompatibility testing of polymers for ortho-
paedic implants using cultured fibroblasts and
osteoblasts, Biomaterials 16 (1995) 987
e
992.
[36] C.A. Scotchford, M.J. Garle, J. Batchelor,
J. Bradley, D.M. Grant, Use of a novel carbon
fibre composite of a THR system: in vitro
biological assessment, Biomaterials 24 (2003)
4871
e
4879.
[37] B.L. Anneaux, M.S. Taylor, S.A. Johnston,
S.W. Shalaby, Biomechanical Properties of
Osseointegrated PEEK-based and Metallic
Endosteal Implants. Society for Biomaterials,
30th annual meeting transactions 2005, p. 129.
[38] B.L. Anneaux, M.S. Taylor, M. Shih,
L.K. Fulton, S.W. Shalaby, Histomorphometric
Evaluation of Osseointegration of Metallic and
Peek-based Endosteal Dental Implants. Society
for Biomaterials, 30th annual meeting trans-
actions, p. 129.
J.
Thermoplast. Compos. Mater. (July 1994) 7.
[27] L.A. Zhang, M.R. Piggott, Water absorption
and fibre/matrix interface durability in carbon-
PEEK, J. Thermoplast. Compos. Mater. (March
2000) 13.
[28] H. Kobayashi, E. Hayakawa, T. Kikutani,
A. Takaku, Effect of quenching and annealing
on fibre pull-out from crystalline polymer
matrices, Adv. Compos. Mater. 1 (2) (1991)
155
e
168.
[29] M.R. Piggott, Why the fibre/polymer interface
can appear to be stronger than the polymermatrix,
Compos. Sci. Technol. 57 (1997) 853
e
857.
[30] M.W. Hyer, Stress analysis of fiber-reinforced
composite materials; 2009.
[31] A.N. Wilkinson, A.J. Ryan, Polymer Process-
ing and Structure Development, Kluwer
Academic Publishers, Netherlands, 1999.
[32] M. Semadeni, H. Zerlik, P. Rossini, J. Mayer,
E. Wintermantel, High fibre volume fraction
injection moulding of carbon fibre reinforced
polyetheretherketone (PEEK) in order to raise
mechanical properties, Polym. Compos. 6 (5)
(1998) 109
e
118.
[33] T. Peter, R. Tognini, R. Raschle, U. Loher,
V. Esslinger,
J. Mayer, E. Wintermantel,
