Biomedical Engineering Reference
In-Depth Information
[4] H. Yildiz, S.K. Ha, F.K. Chang, Composite hip
prosthesis design. II. Simulation, J. Biomed.
Mater. Res. 39 (1998) 102
e
119.
[5] K.B. Kwarteng, C. Stark, Carbon fibre rein-
forced PEEK (APC-2/AS-4) composites for
orthopaedic implants, SAMPE Q (October
1990) P10
e
P14.
[6] G. Zhang, R.A. Latour, J.M. Kennedy,
H.D. Schutte, R.J. Friedman, Long-term
compressive property durability of carbon fibre-
reinforced polyetheretherketone composite in
physiological saline, Biomaterials 17 (1996)
781
e
789.
[7] S.L. Evans, P.J. Gregson, Composite technology
in load-bearing orthopaedic implants, Bioma-
terials 19 (1998) 1329
e
1342.
[8] D. Hull, T.W. Clyne, An Introduction to
Composite Materials (Cambridge Solid State
Science Series), Cambridge University Press,
Cambridge, 1996.
[9] F.L. Matthews, R.D. Rawlings, Composite
Materials: Engineering and Science, Woodhead
Publishing Limited, Cambridge, 1999.
[10] S.K. De, R.J. White, Short Fibre
e
Polymer
Composites, Woodhead Publishing Limited,
Cambridge, England, 1996.
[11] A. Kelly, A discussion on strong fibrous
solids, Proc. Royal Soc. Lond. Ser. A Math.
Phys. Sci. 319 (1536)
Trans. Int. Soc. Technol. Arthroplast. (ISTA) 18
(2005) P2
e
P6.
[17] T.M. Grupp, S. Utzschneider, J. Schwiesau,
B. Fritz, C. Schr¨der, W. Bl¨mer, et al., Bio-
tribology of alternative bearing materials for
knee arthroplasty, WC 2009, IFMBE Proceed-
ings 25/IV (2009) 353
e
355.
[18] A.M.H. Latif, A. Mehats, M. Elcocks,
N. Rushton, R.E. Field, E. Jones, Pre-clinical
studies to validate the MITCH PCR
cup:
a flexible and anatomically shaped acetabular
component with novel bearing characteristics,
J. Mater. Sci. Mater. Med. [Online] (November
2007).
[19] A. Wang, R. Lin, V.K. Polineni, A. Essner,
C. Stark, J.H. Dumbleton, Carbon fibre-
reinforced polyether ether ketone composite as
a bearing surface for total hip replacement,
Tribol. Int. 31 (11) (1998) 661.
[20] S.C. Scholes, A. Unsworth, Pitch-based
carbon-fibre-reinforced poly(ether-ether-
ketone) OPTIMA assessed as a bearing
material in a mobile bearing unicondylar knee
joint. Proc. IMechE Part H J. Eng. Med. 222
(2009) 273.
[21] N. Pace, S. Spurio, L. Pavan, G. Rizzuto,
R.M. Streicher, Clinical trial of a new CF-
PEEK acetabular insert
in hip arthroplasty.
(October 6, 1970)
European Hip
Society,
2002
domestic
95
e
116.
[12] V.B. Gupta, V.K. Kothari (Eds.), Manufactured
Fibre Technology, Chapman and Hall, London,
1997.
[13] S. Thomas, E.G. Zaikov, Polymer Nano-
composites Research Advances, Nova Science
Publishers, New York, 2008.
[14] S.C. Scholes, I.A. Inman, A. Unsworth, E. Jones,
Tribological Assessment of a Flexible Carbon-
fibre-reinforced Poly(ether-ether-ketone) Acetab-
ular Cup Articulating Against an Alumina
FemoralHead,in:Proc.IMechEPartHJ.Eng.
Med. 222 (2008) 273.
[15] E. Jones, R.M. Streicher, Clinical experiences
with carbon fibre composites in hip cup appli-
cations, Twenty-eighth Annual Meeting Trans-
actions, Society of Biomaterials (2002).
[16] N. Pace, M. Marinelli, S. Spurio, R. DiMatteo,
Primary total hip arthroplasty with carbon fibre
reinforced poly-ether-ether-ketone composite
acetabular cup component
d
36 month results,
meeting.
[22] N. Pace, M. Marinelli, S. Spurio, Technical and
histologic analysis of a retrieved carbon fiber-
reinforced poly-ether-ether-ketone composite
alumina bearing liner 28 months after implan-
tation, J. Arthroplast. 23 (2008) 151.
[23] H.O. Pierson, Handbook of Carbon, Graphite,
Diamonds and Fullerines: Properties, Pro-
cessing and Applications, Noyes Publications,
Park Ridge, NJ, 1993.
[24] L.M.O. Birken, A. Berzins, F. Lacroix,
E. Schneider, Composites as Bearing Partner in
Total Knee Replacement: Failure Analysis of
Poly II Components with Respect to Material
Design, European Society for Biomaterials
Conference Proceedings (1998).
[25] R.A. Latour, M.R. Meyer, Fibre reinforcement
of ultrahigh molecular weight polyethylene, in:
Seventeenth Annual Meeting of the Society for
Biomaterials, Scottsdale, Arizona, USA; May
1991.
