Graphics Programs Reference
In-Depth Information
6.
On the Annotate tab of the ribbon, click Add Labels.
7.
In the Add Labels dialog box, do the following:
a.
For Feature, select Pipe Network.
b.
For Label Type, select Entire Network Plan.
c.
For Pipe Label Style, select C-SSWR - Name Only.
d.
For Structure Label Style, select C-SSWR - Name Only.
e.
Click Add.
The entire network
is labeled with the
name of each pipe
and structure.
FiGuRE 16.14
A portion of a structure table created for a
sanitary sewer pipe network
▶
8.
Click any sanitary pipe or structure in the drawing.
9.
For each sanitary sewer manhole, click the label and then use the
square grip to drag the label into a clear location of the drawing.
▶
10.
For each sanitary sewer pipe label, click the label and use its diamond-
shaped grip to slide it to a location that is clear of other text or line-
work. If that isn't possible, use the square grip to drag it to a clear
area in the drawing.
With the labels you have
added, a person reading
the drawing can match
the name of a pipe or
structure with informa-
tion in the table.
11.
Save and close the drawing.
You can view the results of successfully completing this exercise by opening
Creating Pipe Network Tables - Complete.dwg
.
