Bibliography - Atomic Force Microscopy - page 203

[37] Ruf, A.; Abraham, M.; Lacher, M.; Mayr, K.; Zetterer, T. A miniaturised Fabry Perot AFM
sensor , The 8th International Conference on Solid-State Sensors and Actuators, 1995;
pp 660-63.
[38] Peng, Z.; West, P., Crystal sensor for microscopy applications. Applied Physics Letters 2005,
86 (1), 014107-3.
[39] Kim, M. S.; Choi, J. H.; Park, Y. K.; Kim, J. H., Atomic force microscope cantilever calibration
device for quantified force metrology at micro- or nano-scale regime: the nano force calibrator
(NFC). Metrologia 2006, 43 (5), 389-95.
[40] Tortonese, M.; Yamada, H.; Barrett, R. C.; Quate, C. F. Atomic force microscopy using a
piezoresistive cantilever , TRANSDUCERS '91. International Conference on Solid-State Sen-
sors and Actuators. Digest of Technical Papers, San Francisco, CA, 1991; pp 448-51.
[41] Putman, C. A. J.; Degrooth, B. G.; Vanhulst, N. F.; Greve, J., A theoretical comparison between
interferometric and optical beam deflection technique for the measurement of cantilever
displacement in AFM. Ultramicroscopy 1992, 42, 1509-13.
[42] Neagu, C.; van der Werf, K. O.; Putman, C. A. J.; Kraan, Y. M.; de Grooth, B. G.; van Hulst, N.
F.; Greve, J., Analysis of immunolabeled cells by atomic force microscopy, optical micro-
scopy, and flow cytometry. Journal of Structural Biology 1994, 112 (1), 32-40.
[43] Nakano, K., A novel low profile atomic force microscope compatible with optical microscopes.
Review of Scientific Instruments 1998, 69 (3), 1406.
[44] Clifford, C. A.; Seah, M. P., The determination of atomic force microscope cantilever spring
constants via dimensional methods for nanomechanical analysis. Nanotechnology 2005, 16 (9),
1666.
[45] Vick, D.; Brett, M. J.; Westra, K., Porous thin films for the characterization of atomic force
microscope tip morphology. Thin Solid Films 2002, 408 (1-2), 79-86.
[46] DeRose, J. A.; Revel, J. P., Examination of atomic (scanning) force microscopy probe tips
with the transmission electron microscope. Microscopy and Microanalysis 1997, 3 (3),
203-13.
[47] Chung, K. H.; Kim, D. E., Wear characteristics of diamond-coated atomic force microscope
probe. Ultramicroscopy 2007, 108 (1), 1-10.
[48] Ramirez-Aguilar, K. A.; Rowlen, K. L., Tip characterization from AFM images of nanometric
spherical particles. Langmuir 1998, 14 (9), 2562-66.
[49] Zeng, Z.-g.; Zhu, G.-d.; Guo, Z.; Zhang, L.; Yan, X.-j.; Du, Q.-g.; Liu, R., A simple
method for AFM tip characterization by polystyrene spheres. Ultramicroscopy 2008, 108
(9), 975-80.
[50] Villarrubia, J. S., Scanned probe microscope tip characterization without calibrated tip char-
acterizers. Journal of Vacuum Science & Technology B 1996, 14 (2), 1518-21.
[51] Williams, P. M.; Shakesheff, K. M.; Davies, M. C.; Jackson, D. E.; Roberts, C. J.; Tendler,
S. J. B., Blind reconstruction of scanning probe image data. Journal of Vacuum Science &
Technology B 1996, 14 (1557), 1557-62.
[52] Villarrubia, J. S., Morphological estimation of tip geometry for scanned probe microscopy.
Surface Science 1994, 321 (3), 287-300.
[53] Villarrubia, J. S., Algorithms for scanned probe microscope image simulation, surface recon-
struction, and tip estimation. Journal of Research of the National Institute of Standards and
Technology 1997, 102 (4), 425-54.
[54] Williams, P. M.; Shakesheff, K. M.; Davies, M. C.; Jackson, D. E.; Roberts, C. J.; Tendler,
S. J. B., Toward true surface recovery: studying distortions in scanning probe microscopy
image data. Langmuir 1996, 12 (14), 3468-71.
[55] Dongmo, L. S.; Villarrubia, J. S.; Jones, S. N.; Renegar, T. B.; Postek, M.; Song, J. F.,
Experimental test of blind tip reconstruction for scanning probe microscopy. Ultramicroscopy
2000, 85 (3), 141-53.