Digital Signal Processing Reference
In-Depth Information
design files (other than the top-level file). Since this simple project will only
use a single top-level design file, click
Next
.
Select the FPGA Device to be Used
The next dialog box is used to select the FPGA device type as seen in Figure
1.9. The detailed instructions for this step will vary depending on your board
type.
A summary of the different FPGA devices found on each board is shown in
Table 1.1. Find your board's FPGA family and device part number in Table 1.1
and follow the specific instructions below for your board.
Figure 1.9
Setting the FPGA Device Type. Settings shown are for the DE1 board.
