Information Technology Reference
In-Depth Information
R 192.168.5.0/24 [120/1] via 172.16.100.1, 00:00:19, Serial0/0/1
R 192.168.6.0/24 [120/1] via 172.16.100.1, 00:00:19, Serial0/0/1
C 192.168.7.0/24 is directly connected, Loopback0
C 192.168.8.0/24 is directly connected, Loopback1
C 192.168.9.0/24 is directly connected, Loopback2
Task 2: Create a Diagram of the Network Based on the
Router Output
Draw a diagram of the network based on your interpretation of the router outputs in the
following space provided.
Step 1.
Figure 4-4
Topology Diagram for Lab 4-1 (Answer)
Lo0 192.168.4.0/24
Lo0 192.168.5.0/24
Lo0 192.168.6.0/24
S0/0/1
DCE
S0/0/0
HQ
10.10.10.252/30
172.16.100.0/30
S0/0/0
DCE
S0/0/1
Lo0 192.168.1.0/24
Lo0 192.168.2.0/24
Lo0 192.168.3.0/24
Lo0 192.168.7.0/24
Lo0 192.168.8.0/24
Lo0 192.168.9.0/24
B1
B2
Document the interface addresses in Table 4-3.
Step 2.
Table 4-3
Addressing Table for Lab 4-1
Device
Interface
IP Address
Subnet Mask
HQ
S0/0/0
10.10.10.253
255.255.255.252
S0/0/1
172.16.100.1
255.255.255.252
Loopback0
192.168.4.1
255.255.255.0
Loopback1
192.168.5.1
255.255.255.0
Loopback2
192.168.6.1
255.255.255.0
BRANCH1
S0/0/0
10.10.10.254
255.255.255.252
Loopback0
192.168.1.1
255.255.255.0
Loopback1
192.168.2.1
255.255.255.0
Loopback2
192.168.3.1
255.255.255.0
BRANCH2
S0/0/1
172.16.100.2
255.255.255.252
Loopback0
192.168.7.1
255.255.255.0
Loopback1
192.168.8.1
255.255.255.0
Loopback2
192.168.9.1
255.255.255.0
