Biomedical Engineering Reference
In-Depth Information
Renaud, M., Sterken, T., Fiorini, P., Puers, R., Baert, K., van Hoof, C., 2005. Scavenging energy
from human body: design of a piezoelectric transducer. In: Digest of Technical Papers.
TRANSDUCERS
787.
Renaud, M., Fiorini, P., van Schaijk, R., van Hoof, C., 2009. Harvesting energy from the motion
of human limbs: the design and analysis of an impact-based piezoelectric generator. Smart Mater.
Struct. 18 (035001), 16.
Ritter, T., Geng, X., Shung, K.K., Lopath, P.D., Park, S.E., Shrout, T.R., 2000. Shrout.Single
crystal PZN/PT-polymer composites
'
05, vol. 1, pp. 784
for ultrasound transducer applications.
IEEE Trans.
Ultrason. Ferroelectr. Freq. Control 47 (4), 792
800.
Rome, L.C., Flynn, L., Goldman, E.M., Yoo, T.D., 2005. Generating electricity while walking
with loads. Science 309 (5741), 1725
1728.
Romero, E., 2010. Energy Harvesting from Body Motion using Rotational Micro-Generation.
PhD Dissertation, Michigan Technological University.
Romero, E., Neuman, M., Warrington, R., 2011. Rotational enegy harvester for body motion.
MEMS, 2011, January 23
27, Cancun, Mexico, pp. 1325
1328.
Romero, E., Rincon, A., 2012. Piezoelectric load measurement model
in knee implants. In:
Proceedings of the EMBS 2012, Aug. 28
514.
Romero, E., Warrington, R.O., Neuman, M.R., 2009. Energy scavenging sources for biomedical
sensors. Physiol. Meas. 30, R35
R62.
Roundy, S., 2005. On the effectiveness of vibration-based energy harvesting. J. Intell. Mater.
Syst. Struct. 16 (10), 809
823.
Roundy, S., Wright, P.K., 2004. A piezoelectric vibration based generator for wireless electronics.
Smart Mater. Struct. 13 (5), 1131
Sep. 1, San Diego, California, USA, pp. 511
1142.
Roundy, S.J., 2003. Energy Scavenging for Wireless Sensor Nodes with a Focus on Vibration to
Electricity Conversion. PhD thesis, University of California, Berkeley.
Saha, C.R., O
'
Donnell, T., Wang, N., Mccloskey, P., 2008. Electromagnetic generator for har-
vesting energy from human motion. Sens. Actuators A Phys. 147 (1), 248
253.
Sasaki, K., Osaki, Y., Okazaki, J., Hosaka, H., Itao, K., 2005. Vibration-based automatic power-
generation system. Microsyst. Technol. 11 (8), 965
969.
Schroeppel, E. A., 1987. Pacing lead with piezoelectric power generating means, U.S. Patent
4,690,143.
Seok, M., Hanson, S., Lin, Y.S., Foo, Z., Kim, D., Lee, Y., et al., 2008. The phoenix processor:
a 30 pw platform for sensor applications. In: IEEE Symposium on VLSI Circuits, June 18
19,
Honolulu, Hawaii, USA, pp. 188
189.
Schmidt, C.L., Skarstad, P.M., 2001. The future of lithium and lithium-ion batteries in implant-
able medical devices. J. Power Sources 97
98, 742
746.
Shenck, N.S., Paradiso, J.A., 2001. Energy scavenging with shoe-mounted piezo-electrics. IEEE
Micro 21 (3), 30
42.
Siebert, J., Collier, J., Amirtharajah, R., 2005. Self-timed circuits for energy harvesting AC power
supplies. In: Low Power Electronics and Design, ISLPED
'
05, Aug. 8
10, San Diego, California,
USA, pp. 315
318.
Slob, P., 2000. The Human Power Chart Sustained Comfortable Cranking. PhD thesis, Delft
University of Technology.
Sodano, H.A., Inman, D.J., Park, G., 2005a. Generation and storage of electricity from power
harvesting devices. J. Intell. Mater. Syst. Struct. 16 (1), 67
75.
Sodano, H.A., Inman, D.J., Park, G., 2005b. Comparison of piezoelectric energy harvesting
devices for recharging batteries. J. Intell. Mater. Syst. Struct. 16 (10), 799
807.
