Graphics Programs Reference
In-Depth Information
7. Go into CV mode, and move the CVs to line up the edges of the newly formed
closed ends with the bottom and top cylinders. Repeat for the other side, as shown
in Figure 5.42.
8. As you did in steps 1 and 2, attach and then detach the loft you just edited with CVs
(we'll call it the side panel) and the front panel, as shown in Figure 5.43, to set up a
smooth transition and a tangency. Repeat for the back panel and the other end of the
cylinders to make the other side panel.
Figure 5.42
In CV mode, line
up the ends and
cylinders.
Figure 5.43
Create a smooth
transition between
the surfaces.
