Graphics Programs Reference
In-Depth Information
Figure 14.21
Wire changed by removing a device from a circuit
The workflow for creating circuits can be easily learned and can become
second nature to your design and modeling processes. Practice creating
circuits by doing the following:
2. Open the EP - Level 1 floor plan view. Select the four receptacles in
Office 104. Click the Power button on the Create Systems panel of the
Modify | Electrical Fixtures tab.
3. Click the Select Panel button on the System Tools panel of the tab. In
the Panel drop-down on the Options Bar, select panel LA.
4. Click the Arc Wire button on the Convert To Wire panel of the Electrical
Circuits tab.
5. Click the Tag By Category button located on the Tag panel of the
Annotate tab. Deselect the Leader box on the Options Bar, and select
the home run created for the circuit. Click the Modify button on the
ribbon to exit the Tag command.
6. Repeat steps 1-5 for the three duplex receptacles in Office 103.
7. Select the quadruplex receptacle in Office 103. Right-click one of the
connector grips. Select the Add To Circuit option from the menu. Click
one of the duplex receptacles in Office 103. Click the arc-type wiring
grip that appears. Select the quadruplex receptacle again, and
