Graphics Programs Reference
In-Depth Information
When you select an element on the circuit to which you want to add your
device or fixture, you are given the option to automatically generate wiring
that shows the added device as part of the circuit.
Selecting a device that is already part of a circuit and right-clicking its
connector gives you a menu with the option to remove the element from
the circuit. Removing a fixture or device from a circuit does not delete any
wiring connected to it, but the wiring may change depending on the location
of the removed element in the circuit.
Figure 14.21
shows how wiring can
be affected when a device is removed from a circuit. The receptacle in
the lower-right corner was removed from the circuit. The receptacle in the
upper-right corner is still part of the circuit, so the wiring has changed to a
home run. Also, the wire from the unconnected receptacle to the one on the
left has changed to a home run because it is not part of the circuit but has a
devicedownstreamthatispartofthecircuit.Inanycase,removingelements
from a circuit usually requires some cleanup of the wiring.
