Hardware Reference
In-Depth Information
Supplies for Chapter 5
DISTRIbuTOR KEy
• A
Arduino Store (
http://store.arduino.cc/ww
)
• AF
Adafruit (
http://adafruit.com
)
• D
Digi-Key (
www.digikey.com
)
• F
Farnell (
www.farnell.com
)
• J
Jameco (
http://jameco.com
)
• MS
Maker SHED (
www.makershed.com
)
• P
Pololu (
www.pololu.com
)
• RS
RS (
www.rs-online.com
)
• SF
SparkFun (
www.sparkfun.com
)
• SS
Seeed Studio (
www.seeedstudio.com
)
»
1 100-ohm resistor
D
100QBK-ND,
J
690620,
F
9337660,
RS
707-8625
»
3 220-ohm resistors
D
220QBK-ND,
J
690700,
F
9337792,
RS
707-8842
»
1 2-axis joystick (for joystick client)
J
2082855,
SF
COM-09032,
AF
245,
F
1428461
»
1accelerometer (for tilt board client)
The circuit
shown uses an ADXL330 accelerometer, but most any
analog accelerometer should do the job.
J
28017,
SF
SEN-00692,
AF
163,
RS
726-3738,
P
1247,
MS
MKPX7
»
1 perforated printed circuit board
D
V2018-ND,
J
616673,
SS
STR125C2B,
F
4903213,
RS
159-5420
»
4 LEDs
It's best to use at least two colors with
established semantics: a big red one, a big green one,
and two others of whatever color suits your fancy.
D
160-1144-ND or 160-1665-ND,
J
34761 or 94511,
F
1015878,
RS
247-1662 or 826-830,
SF
COM-09592 or
COM-09590
»
1 push button
Use one that's robust and can
stand a good stomping.
»
1 project enclosure
Get creative with materials you
have laying around the house.
»
1 sheet triple-wall cardboard (for tilt board client)
»
1 tab of Velcro
Get any Velcro from your closest fabric
or hardware store.
PROJECT 8: Networked Pong
NOTE:
You'll see two devices you can build in this chapter. If you
plan to build both, double the quantities on all parts except the
joystick, the accelerometer, and the triple-wall cardboard.
»
1 Arduino Ethernet board
A
A000050
Alternatively, an Uno-compatible board (see Chapter 2)
with an Ethernet shield will work.
SF
DEV-09026,
J
2124242,
A
A000056,
AF
201,
F
1848680
»
1 Ethernet connection to the Internet
Your home
router most likely has Ethernet jacks in the back. If
you've hooked up your computer to the Internet using
Ethernet, you know where the ports are.
4
3
2
1
5
8
6
7
Figure 5-1.
New parts for this chapter:
1.
Triple-wall cardboard
2.
3-axis accelerometer
3.
2-axis joystick
4.
Pushbutton
5.
Velcro
6.
Project enclosure, made from mat board
7.
1/16" mat board template for project enclosure
8.
Perforated circuit board. Don't
forget plenty of male header pins for the breakout boards.
