Information Technology Reference
In-Depth Information
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,
➥
400000/esp@f,800000/sd@1,0
1. c0t2d0 <SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,
➥
400000/esp@f,800000/sd@2,0
2. c0t3d0 <SUN1.05 cyl 2036 alt 2 hd 14 sec 72> tokyo
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,
➥
400000/esp@f,800000/sd@3,0
Specify disk (enter its number): 0
selecting c0t1d0
[disk formatted]
Warning: Current Disk has mounted partitions.
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
Basic understanding and general use of the
format
command is a test objective. Be
familiar with the
format
subcommands and submenus along with their uses.
The following listing shows you how to use several of the
format
subcom-
mands—namely,
disk
,
volname
,
verify
, and
current
. Consult the
format(1M)
manual page for more information.
format> disk
AVAILABLE DISK SELECTIONS:
0. c0t1d0 <SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,
➥
400000/esp@f,800000/sd@1,0
1. c0t2d0 <SUN2.1G cyl 2733 alt 2 hd 19 sec 80>
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,
➥
400000/esp@f,800000/sd@2,0
2. c0t3d0 <SUN1.05 cyl 2036 alt 2 hd 14 sec 72> tokyo
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,
➥
400000/esp@f,800000/sd@3,0
Specify disk (enter its number)[0]: 1
selecting c0t2d0
[disk formatted]
format> volname
Enter 8-character volume name (remember quotes)[“”]:solaris
Ready to label disk, continue? y
format> verify
