Biomedical Engineering Reference
In-Depth Information
21 o. K. Muratoglu and s. M. Kurtz. 'Alternative bearing surfaces in hip replacement'.
Hip Replacement: Current trends and controversies
. r. sinha (ed), Marcel dekker,
new York, 2002.
22 L. costa and P. Bracco. 'Mechanisms of crosslinking and oxidative degradation of
UHMWPe'.
The UHMWPE Handbook: ultra-high molecular weight polyethylene in
total joint replacement
. s. M. Kurtz (ed.), elsevier Academic Press, san diego, 2004.
23 s. M. Kurtz, M. L. Villarraga, M. P. Herr, J. s. Bergstrom, c. M. rimnac and A.
A. edidin. 'thermomechanical behavior of virgin and highly crosslinked ultra-high
molecular weight polyethylene used in total joint replacements'.
biomaterials
, 2002,
23
, 3681-97.
24 c. P. r. nair and G. clouet. 'thermal iniferters - their concept and application
in free-radical polymerization'.
J Macromol sci Rev Macromol Chem Phys
, 1991,
C31
, 311-40.
25 K. d. Kühn.
bone Cements
. springer, Berlin, 2000.
26 J. charnley. 'Anchorage of the femoral head prostheses of the shaft of the femur'.
J bone Joint surg
, 1960,
42
, 28-30.
27 K. d. Kühn. 'Properties of bone cement: what is bone cement?'
The Well-Cemented
Hip Arthroplasty: Theory and Practice.
s. J. Breusch, H. Malchau (eds), springer,
Heidelberg, 2005.
28 d. A. nussbaum, P. Gailloud and K. Murphy. 'the chemistry of acrylic bone cements
and implications for clinical use in image-guided therapy'.
J Vasc Intervent Rad
,
2004,
15
, 121-6.
29 W. ege, K. d. Kühn, c. tuchscherer and H. Maurer. 'Physical and chemical properties
of bone cements'.
biomaterials in surgery
, G. H. i. M. Walenkamp (ed.), Georg
thieme, stuttgart, 1998.
30 K. draenert and Y. draenert. 'Properties of bone cement: the three interfaces'.
The
Well-Cemented Hip Arthroplasty: Theory and Practice.
s. J. Breusch and H. Malchau
(eds), springer, Heidelberg, 2005.
31 G. Bergmann, F. Graichen and A. rohlmann. 'Hip joint loading during walking and
running, measured in two patients'.
J biomechanics
, 1993,
26
, 969-90.
32 n. Berme and J. P. Paul. 'Load actions transmitted by implants'.
J biomed Eng
,
1979,
1
, 268-72.
33 A. J. c. Lee, r. s. M. Ling and s. s. Vangala. 'some clinically relevant variables
affecting the mechanical behaviour of bone cement'.
Arch Orthop Traumat surg
,
1978,
92
, 1-18.
34 A. J. c. Lee, r. s. M. Ling, s. Gheduzzi, J.-P. simon and r. J. renfro. 'Factors
affecting the mechanical and viscoelastic properties of acrylic bone cement'.
J Mater
sci Mater in Med
, 2002,
13
, 723-33.
35 c. Lee. 'Properties of bone cement: the mechanical properties of PMMA bone
cement'.
The well-cemented hip arthroplasty: Theory and Practice.
s. J. Breusch,
H. Malchau (eds), springer, Heidelberg, 2005.
36 G. Lewis. 'Properties of acrylic bone cement: state of the art review'.
J biomed
Mater Res
, 1997,
38
, 155-82.
37 s. saha and s. Pal. 'the mechanical properties of bone cement: a review'.
J biomed
Mater Res
, 1984,
18
, 435-62.
38 W. d. callister.
Materials science and Engineering: an introduction
. John Wiley &
sons, new York, 2007.
39 o. r. eden, A. J. c. Lee and r. M. Hooper. 'stress relaxation modelling of
polymethylmethacrylate bone cement'.
Proc Inst Mech Eng
, 2002,
216
, 195-9.
