Biomedical Engineering Reference
In-Depth Information
3 H. W. Birnkraut. 'synthesis of UHMWPe'.
Ultra-high Molecular Weight Polyethylene
as a biomaterial in Orthopedic surgery.
H.G. Willert, G.H. Buchhorn and P. eyerer
(eds), Hogrefe & Huber, new York, 1991.
4 s. M. Kurtz. 'From ethylene gas to UHMWPe component: the process of producing
orthopedic implants'.
The UHMWPE Handbook: ultra-high molecular weight
polyethylene in total joint replacement
. s. M. Kurtz (ed.), elsevier Academic Press,
san diego, 2004.
5 s. M. Kurtz, o. K. Muratoglu, M. evans and A. A. edidin. 'Advances in the processing,
sterilization, and crosslinking of ultra-high molecular weight polyethylene for total
joint arthroplasty'.
biomaterials
,
1999,
20
, 1659-88.
6 M. d. ries. 'enhanced polyethylene implants: have we been there before?'
Instr.
Course Lect
, 2005,
54
, 189-92.
7 c. Atienza and W. J. Maloney. 'Highly cross-linked polyethylene bearing surfaces
in total hip arthroplasty'.
J surg Orthop Adv
, 2008,
17
, 127-33.
8 L. A. Pruitt. 'deformation, yielding, fracture and fatigue behavior of conventional
and highly cross-linked ultra high molecular weight polyethylene'.
biomaterials
,
2005,
26
, 905-15.
9 A. Bellare, H. schnablegger and r. e. cohen. 'A small-angle X-ray scattering
study of high-density polyethylene and ultra-high molecular weight polyethylene'.
Macromolecules
,
1995,
17
, 2325-33.
10 s. L. cooper, s. A. Visser, r. W. Hergenrother and n. M. K. Lamba. 'Polymers'.
biomaterials science: an introduction to materials in medicine
. B. d. ratner, A. s.
Hoffman, F. J. schoen, J. e. Lemons (eds), elsevier, London, 2004.
11 K. s. K. Karuppiah, A. L. Bruck, s. sundararajan, J. Wang, Z. Q. Lin, Z. H. Xu and
X. d. Li. 'Friction and wear behavior of ultra-high molecular weight polyethylene
as a function of polymer crystallinity'.
Acta biomaterialia
, 2008,
4
, 1401-10.
12 P. eyerer, A. Frank and r. Jin. 'characterization of ultrahigh molecular weight
polyethylene (UHMWPe): extraction and viscometry of UHMWPe'.
Plastverarbeiter
,
1985,
36
, 46-54.
13 r. P. Kusy and J. Q. Whitley. 'Use of a sequential extraction technique to determine
the MWd of bulk UHMWPe'.
J Appl Poly sci
,
1986,
32
, 4263-9.
14 H. L. Wagner and J. G. dillon. 'Viscosity and molecular weight distribution of
ultra-high molecular weight polyethylene'.
J Appl Poly sci
,
1988,
36
, 567-82.
15 s. M. Kurtz, L. Pruitt, c. W. Jewett, r. P. crawford, d. J. crane and A. A. edidin.
'The yielding, plastic flow, and fracture behavior of ultra-high molecular weight
polyethylene used in total joint replacements'.
biomaterials
,
1998,
19
, 1989-
2003.
16 A. A. edidin and s. M. Kurtz. 'development and validation of the small punch test
for UHMWPe used in total joint replacements'.
Functional biomaterials
,
n. Katsube,
W. soboyejo, and M. sacks (eds), trans tech Publications, Winterthur, 2001.
17 J. J. Jacobs, A. shanbhag, t. t. Glant, J. Black and J. o. Galante. 'Wear debris in
total joints'.
J Am Acad Orthop surg
, 1994, 2, 212-20.
18 J. Jacobs, r. M. Urban, J. L. Gilbert, A. skipor, J. Black, M. J. Jasty and J. o.
Galante. 'Local and distant products from modularity'.
Clin Orthop
, 1995,
319
,
94-105.
19 J. J. Jacobs, K. A. roebuck, M. Archibeck, n. J. Hallab and t. t. Glant. 'osteolysis:
basic science'.
Clin Orthop
, 2001,
393
, 71-7.
20 G. Lewis. 'Polyethylene wear in total hip and knee arthroplasties'.
J biomed Mater
Res
,
1997,
38
, 55-75.
