Biomedical Engineering Reference
In-Depth Information
61. J. Ge, X. Zeng, X. Tao, X. Li, Z. Shen, J. Yun, J. Chen, “Preparation and char-
acterization of PS-PMMA/ZnO nanocomposite i lms with novel properties
of high transparency and UV-shielding capacity,”
J. of Appl. Polym. Scie.
, Vol.
118, pp.1507-1512, (2010).
62.
W. H. Teh, U. Durig, U. Drechsler, C. G. Smith, H. J. Guntherodt, “Ef ect
of low numerical-aperture femtosecond two-photon absorption on (SU-8)
resist for ultrahigh-aspect-ratio micro stereo lithography,”
J. Appl. Phys.
,
Vol.97, pp. 054907-11, (2005).
63. V. Kalinin, A. Rar, S. Jesse, “A Decade of Piezoresponse Force Microscopy:
Progress, Challenges, and Opportunities,”
IEEE
Trans. Ultrason. Ferroelectr.
Freq. Contr.
Vol. 53,pp. 2226-2252, (2006).
64. M. H. Zhao, Z. L. Wang, S. X. Mao, “Piezoelectric characterization of indi-
vidual zinc oxide nanobelt probed by piezoresponse force microscope,”
Nano
Lett.
, Vol. 4, pp.587-590, (2004).
65. R. Agrawal, D. H. Espinosa; “Giant piezoelectric size ef ects in zinc oxide and
gallium nitride nanowires. a i rst principles investigation”,
Nano Lett.
, Vol.
11,pp.786-790, (2011).
66. S Dai, M Gharbi, P Sharma and H S Park, “Surface piezoelectricity: Size
ef ects in nanostructures and the emergence of piezoelectricity in non-piezo-
electric materials,”
J. Appl. Phys.
, Vol.110, pp.104305-7 (2011).
67. M S Majdoub, P Sharma, T.Cagin, “Enhanced size-dependent piezoelec-
tricity and elasticity in nanostructures due to the l exoelectric ef ect,”
Phys.
Rev.B,
Vol.77,pp. 125424(2008).
68. A. T. Al-Halhouli, I. Kampen, T. Krah, S. Buttgenbach, “Nanoindentation
testing of SU-8 photoresist mechanical properties,”
Microelectron. Eng.
,
Vol.85, pp.942-944 (2008)
69. G. M. Pharr, “Measurement of mechanical properties by ultra-low load
indentation,”
Mater. Sci. Eng
. Vol. 253,pp.151-159, (1998).
70. I. Novak, I. Krupa, I. Chodak, “Analysis of correlation between percolation
concentration and elongation at break in i lled electro conductive epoxy-
based adhesives,”
Eur. Polym. J.
, Vol. 39,pp. 585-592 (2003).
71. T.S. Kim, D.S. Yoon, and J.H. Lee,
Micromanufacturing and Nanotechnology
,
ISBN-10 3-540-253777, Springer-Verlag Berlin Heidelberg, Printed in
Germany, 304,( 2006).
72. L.A. Pinnaduwage, D.L. Hedden, A. Gehl, V.I. Boiadjiev, J.E. Hawk,
R.H. Farahi, and T. Thundat, “A sensitive , handheld vapor sensor based
on microcantilevers,”
Review of Scientific Instruments
, vol. 75, 2008,
pp. 4554-4557.
73. A.R. Krause, C.V. Neste, L. Senesac, T. h undat, and E. Finot, “Trace explo-
sive detection using photothermal del ection spectroscopy,”
Journal of
Applied Physics
, vol. 103, 2008, p. 094906.
74. C.W.V. Neste, L.R. Senesac, D. Yi, and T. h undat, “Standof detection
of explosive residues using photothermal microcantilevers,” 2008, pp.
2008-2010.
