Biomedical Engineering Reference
In-Depth Information
16. J.M. Shaw, J.D. Gelorme, N.C. LaBianca, W.E. Conley, and S.J. Holmes,
“Negative photoresists for optical lithography,”
IBM Journal of Research and
Development
, vol. 41, 1997, pp. 81-94.
17. J. Brugger, P. Renaud, and P. Vettiger, with M. Despont and H. Lorenz,
N.Fahrni, “High aspect ratio ultrathick, negative-tone near-UV photoresist
for MEMS applications,”
IEEE MEMS
, 1997, pp. 518-522.
18. H. Lorenz, M. Despont, M. Fahrni, N. LaBianca, P. Vettiger, and P. Renaud,
“SU-8: a low-cost negative resist for MEMS,”
J. Micromech. Microeng
, vol. 7,
1997, pp. 121-124.
19. Genolet G, Brugger J, Despont M, Drechsler U, Vettiger P, “Sot , entirely
photoplastic probes for scanning force microscopy,”
Rev. Sci. Instrum.
, vol.
70, 1999, p. 2398.
20. J. h eysen, A.D. Yalcinkaya, P. Vettiger, and A. Menon, “Polymer-based
stress sensor with integrated readout,”
Journal of Physics D: Applied Physics
,
vol. 35, 2002, pp. 2698-2703.
21.
J.H.T. Ransley, M. Watari, D. Sukumaran, and R.A. McKendry, A.A. Seshia,
“SU8 bio-chemical sensor microarrays,”
Microelectronic Engineering
, vol. 83,
2006, pp. 1621-1625.
22.
M. Nordström, S. Keller, M. Lillemose, A. Johansson, S. Dohn, D. Hael iger,
G. Blagoi, M. Havsteen-jakobsen, and A. Boisen, “SU-8 Cantilevers for Bio/
chemical Sensing; Fabrication, Characterisation and Development of Novel
Read-out Methods,”
Sensors
, 2008, pp. 1595-1612.
23.
L. Gammelgaard, P.A. Rasmussen, M. Calleja, P. Vettiger, and A. Boisen,
“Microfabricated photoplastic cantilever with integrated photoplastic/carbon
based piezoresistive strain sensor,”
Applied Physics Letters
, vol. 88, 2006, p. 113508.
24.
N. S. Kale, S. Nag, R. Pinto, V. R. Rao,”Fabrication and Characterization of a
Polymeric Microcantilever with an Encapsulated Hotwire CVD Polysilicon
Piezoresistor”,
J. Microelectromech. Syst.
,vol.18, 2009.
25.
V. Seena, A. Rajorya, P. Pant, S. Mukherji and V. R. Rao., “Polymer microcan-
tilever biochemical sensors with integrated polymer composites for electri-
cal detection”,
Solid State Sci.
, vol.11, pp.1606-1611, 2009.
26.
V. Seena, A.Rajorya, A.Fernandes,P.Pant, S.Mukherji, V.R.Rao, “Fabrication
and characterization of novel polymer composite microcantilever sensors
for explosive detection ”,
Technical Digest, IEEE 23rd Int. Conf. MEMS
, pp.
851 - 854,Hong Kong, Jan24-28, 2010.
27.
V.Seena, A.Fernandes, P.Pant, S.Mukherji and V.R.Rao “Polymer nanocom-
posite nanomechanical cantilever sensors: material characterization, device
development and application in explosive vapour detection”,
Nanotechnology
,
Vol 22, p. 295501, 2011
28.
V.Seena, A. Nigam, P. Pant, S Mukherjee and V. Ramgopal Rao,
IEEE/ASME
Journal of Microelectromechanical Systems
vol 21, pp294-301,2012
29.
Prasenjit Ray and V. Ramgopal Rao,
Appl. Phys. Lett.
102, 064101 (2013).
30.
K. Prashanthi, H. Zhang, V. R. Rao, T. h undat,
Phys. Status Solidi RRL
, “Local
piezoelectric response of ZnO nanoparticles embedded in a photosensitive
polymer,”.Vol.6, pp.77-79, (2012).
