Environmental Engineering Reference
In-Depth Information
49. Orita K, Morimura T, Horiuchi T et al (1997) In situ energy-dispersive X-ray reflectivity
measurements of structural changes in thin films for organic electroluminescent devices.
Synth Met 91:155-158
50. Paci B, Generosi A, Albertini VR et al (2005) In situ energy dispersive x-ray reflectometry
measurements on organic solar cells upon working. Appl Phys Lett 87:194110
51. Paci B, Generosi A, Albertini VR et al (2006) Controlling photoinduced degradation in
plastic photovoltaic cells: a time-resolved energy dispersive x-ray reflectometry study. Appl
Phys Lett 89:043507
52. Andreasen JW, Gevorgyan SA, Schleputz CM et al (2008) Applicability of X-ray
reflectometry to studies of polymer solar cell degradation. Sol Energy Matter Sol Cells
92:793-798
53. Garcia-Belmonte G, Munar A, Barea EM et al (2008) Charge carrier mobility and lifetime
of organic bulk heterojunctions analyzed by impedance spectroscopy. Org Electron 9:
847-851
54. Bisquert J (2002) Theory of the impedance of electron diffusion and recombination in a thin
layer. J Phys Chem B 106:325-333
55. Fabregat-Santiago F, Garcia-Belmonte G, Mora-Sero I et al (2011) Characterization of
nanostructured hybrid and organic solar cells by impedance spectroscopy. Phys Chem Chem
Phys 13:9083-9118
56. Garcia-Belmonte G, Boix PP, Bisquert J et al (2010) Simultaneous determination of carrier
lifetime
and
electron
density-of-states
in
P3HT:PCBM
organic
solar
cells
under
illumination by impedance spectroscopy. Sol Energy Matter Sol Cells 94:366-375
57. Bisquert J, Fabregat-Santiago F, Mora-Sero I et al (2009) Electron lifetime in dye-sensitized
solar cells: theory and interpretation of measurements. J Phys Chem C 113:17278-17290
58. Glatthaar M, Mingirulli N, Zimmermann B et al (2005) Impedance spectroscopy on organic
bulk-heterojunction solar cells. Phys Status Solidi A-Appl Mat 202:R125-R127
59. Glatthaar M, Riede M, Keegan N et al (2007) Efficiency limiting factors of organic bulk
heterojunction solar cells identified by electrical impedance spectroscopy. Sol Energy Mater
Sol Cells 91:390-393
60. Wang MD, Xie FY, Xie WG et al (2011) Device lifetime improvement of polymer-based
bulk heterojunction solar cells by incorporating copper oxide layer at Al cathode. Appl Phys
Lett 98:183304
61. Wang MD, Tang Q, An J et al (2010) Performance and stability improvement of
P3HT:PCBM-based solar cells by thermally evaporated chromium oxide (CrOx) interfacial
layer. ACS Appl Mater Interfaces 2:2699-2702
62. Kim JY, Kim SH, Lee HH et al (2006) New architecture for high-efficiency polymer
photovoltaic cells using solution-based titanium oxide as an optical spacer. Adv Mater
18:572-576
63. Kim JY, Lee K, Coates NE et al (2007) Efficient tandem polymer solar cells fabricated by
all-solution processing. Science 317:222-225
64. Lee K, Kim JY, Park SH et al (2007) Air-stable polymer electronic devices. Adv Mater
19:2445-2449
65. Cho S, Lee K, Heeger AJ (2009) Extended lifetime of organic field-effect transistors
encapsulated with titanium sub-oxide as an 'Active' passivation/barrier layer. Adv Mater
21:1941-1944
66. Lee JK, Coates NE, Cho S et al (2008) Efficacy of TiOx optical spacer in bulk-
heterojunction solar cells processed with 1,8-octanedithiol. Appl Phys Lett 92:243308
67. Shrotriya V, Li G, Yao Y et al (2006) Transition metal oxides as the buffer layer for
polymer photovoltaic cells. Appl Phys Lett 88:073508
68. Zhao DW, Sun XW, Jiang CY et al (2008) Efficient tandem organic solar cells with an Al/
MoO3 intermediate layer. Appl Phys Lett 93:083305
69. Zhang F, Zhao D, Zhuo Z et al (2010) Inverted small molecule organic solar cells with Ca
modified ITO as cathode and MoO3 modified. Sol Energy Matter Sol Cells 94:2416-2421
Search WWH ::
Custom Search