Environmental Engineering Reference
In-Depth Information
26. Krebs FC, Norrman K (2007) Analysis of the failure mechanism for a stable organic
photovoltaic during 10000 h of testing. Prog Photovolt Res Appl 15:697-712
27. Brabec
C, Dyakonov
V, Parisi J, et al
(2003) Organic
photovoltaics:
concepts
and
realization, p 60
28. de Jong MP, van Ijzendoorn LJ, de Voigt MJA (2000) Stability of the interface between
indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer
light-emitting diodes. Appl Phys Lett 77:2255-2257
29. Girtan M, Rusu M (2010) Role of ITO and PEDOT:PSS in stability/degradation of polymer:
fullerene bulk heterojunctions solar cells. Sol Energy Matter Sol Cells 94:446-450
30. Kawano K, Pacios R, Poplavskyy D et al (2006) Degradation of organic solar cells due to air
exposure. Sol Energy Matter Sol Cells 90:3520-3530
31. Aziz H, Xu G (1996) A degradation mechanism of organic light-emitting devices. Synth
Met 80:7-10
32. Aziz H, Popovic ZD, Hu NX et al (1999) Degradation mechanism of small molecule-based
organic light-emitting devices. Science 283:1900-1902
33. Reese MO, Morfa AJ, White MS et al (2008) Pathways for the degradation of organic
photovoltaic P3HT : PCBM based devices. Sol Energy Matter Sol Cells 92:746-752
34. Reese MO, Morfa AJ, White MS et al (2008) Short-term metal/organic interface stability
investigations
of
organic
photovoltaic
devices.
Pvsc:
2008
33rd
IEEE
photovoltaic
specialists conference. vols 1-4:1491-1493
35. Li JG, Kim S, Edington S et al (2011) A study of stabilization of P3HT/PCBM organic solar
cells by photochemical active TiOx layer. Sol Energy Matter Sol Cells 95:1123-1130
36. Fery C, Racine B, Vaufrey D et al (2005) Physical mechanism responsible for the stretched
exponential
decay
behavior
of
aging
organic
light-emitting
diodes.
Appl
Phys
Lett
87:213502
37. Schuller S, Schilinsky P, Hauch J et al (2004) Determination of the degradation constant of
bulk heterojunction solar cells by accelerated lifetime measurements. Appl Phys A Mater
Sci Process 79:37-40
38. Logdlund M, Bredas JL (1994) Theoretical-studies of the interaction between aluminum and
poly(P-phenylenevinylene) and derivatives. J Chem Phys 101:4357-4364
39. Karst N, Bernede JC (2006) On the improvement of the open circuit voltage of plastic solar
cells by the presence of a thin aluminium oxide layer at the interface organic/aluminium.
Phys Status Solidi A-Appl Mat 203:R70-R72
40. Melzer C, Krasnikov VV, Hadziioannou G (2003) Organic donor/acceptor photovoltaics:
the role of C-60/metal interfaces. Appl Phys Lett 82:3101-3103
41. Vogel M, Doka S, Breyer C et al (2006) On the function of a bathocuproine buffer layer in
organic photovoltaic cells. Appl Phys Lett 89:163501
42. Zhang ST, Zhou YC, Zhao JM et al (2006) Role of hole playing in improving performance
of organic light-emitting devices with an Al2O3 layer inserted at the cathode-organic
interface. Appl Phys Lett 89:043502
43. Hung LS, Tang CW, Mason MG (1997) Enhanced electron injection in organic
electroluminescence devices using an Al/LiF electrode. Appl Phys Lett 70:152-154
44. Brabec CJ, Shaheen SE, Winder C et al (2002) Effect of LiF/metal electrodes on the
performance of plastic solar cells. Appl Phys Lett 80:1288-1290
45. van Gennip WJH, van Duren JKJ, Thune PC et al (2002) The interfaces of poly(p-phenylene
vinylene) and fullerene derivatives with Al, LiF, and Al/LiF studied by secondary ion mass
spectroscopy and x-ray photoelectron spectroscopy: formation of AlF3 disproved. J Chem
Phys 117:5031-5035
46. McNeill CR, Fell CJR, Holdsworth JL et al (2005) Screening for artifacts in near-field
scanning photocurrent microscopy images of polymer solar cells. Synth Met 153:85-88
47. Renaud G, Lazzari R, Leroy F (2009) Probing surface and interface morphology with
grazing incidence small angle X-ray scattering. Surf Sci Rep 64:255-380
48. Caminiti R, Albertini VR (1999) The kinetics of phase transitions observed by energy-
dispersive X-ray diffraction. Int Rev Phys Chem 18:263-299
Search WWH ::




Custom Search