Civil Engineering Reference
In-Depth Information
ISO, International Organization for Standardization (2006a) ISO 14040:2006 environmental
management—life cycle assessment—principles and framework
ISO, International Organization for Standardization (2006b) ISO 14025 environmental labels and
declarations—type III environmental declarations—principles and procedures
ISO, International Organization for Standardization (2008) 15686-8:2008—buildings and
constructed assets—service-life planning—part 8: reference service life and service-life
estimation
Itard L, Klunder G (2007) Comparing environmental impacts of renovated housing stock with
new construction. Build Res Inf 35:252-267
Kalogirou S (2009) Thermal performance, economic and environmental life cycle analysis of
thermosiphon solar water heaters. Sol Energy 83:39-48
Kalogirou SA (2004) Environmental benefits of domestic solar energy systems. Energy Convers
Manage 45:3075-3092
Kubiszewski I, Cleveland CJ, Endres PK (2010) Meta-analysis of net energy return for wind
power systems. Renew Energy 35:218-225
Malmqvist T, Glaumann M, Scarpellini S, Zabalza I, Aranda A, Llera E, Díaz S (2010) LCA in
buildings: ENSLIC simplified method and guidelines. Energy 36(4):1900-1907
McCall RA, McNeil SJ (2007) Comparison of the energy, time and water usage required for
maintaining carpets and hard floors. Indoor Built Environ 16:482-486
Minister for the Environment, Heritage and Local Government (2007) Building regulations 2007
technical guidance document L, conservation of fuel and energy—dwellings. Ireland
Mulder K, Hagens NJ (2008) Energy return on investment: toward a consistent framework.
AMBIO: J Hum Environ 37:74-79
Nawaz I, Tiwari GN (2006) Embodied energy analysis of photovoltaic (PV) system based on
macro- and micro-level. Energy Policy 34:3144-3152
Pacca S, Sivaraman D, Keoleian GA (2007) Parameters affecting the life cycle performance of
PV technologies and systems. Energy Policy 35:3316-3326
PÉ International (2013) Gabi software and database. Available at.
www.pe-international.com
PRÉ Consultants (2013) SIMAPRO Software. Available at.
www.simapro.com
Raugei M, Bargigli S, Ulgiati S (2007) Life cycle assessment and energy pay-back time of
advanced photovoltaic modules: CdTe and CIS compared to poly-Si. Energy 32:1310-1318
Richards BS, Watt ME (2007) Permanently dispelling a myth of photovoltaics via the adoption of
a new net energy indicator. Renew Sustain Energy Rev 11:162-172
Sartori I, Hestnes AG (2007) Energy use in the life cycle of conventional and low-energy
buildings: a review article. Energy Build 39:249-257
Segers R (2008) Three options to calculate the percentage renewable energy: an example for a
EU policy debate. Energy Policy 36:3243-3248
Sharma A, Saxena A, Sethi M, Shree V, Goel V (2010) Life cycle assessment of buildings: a
review. Renewable and sustainable energy reviews. doi:
10.1016/j.rser.2010.09.008
(in press)
Sustainable Energy Authority Ireland (2007) Dwelling energy assessment procedure (DEAP)—
Irish official method for calculating and rating the energy performance of dwellings
Swiss Centre for Life Cycle Inventories (2010) ECOINVENT, life cycle inventory database.
Available at.
http://www.ecoinvent.org/
Thormark C (2006) The effect of material choice on the total energy need and recycling potential
of a building. Build Environ 41:1019-1026
Treloar GJ, Love PED, Holt GD (2001) Using national input-output data for embodied energy
analysis of individual residential buildings. Constr Manage Econ 19:49-61
Udo De Haes HA, Heijungs R (2007) Life-cycle assessment for energy analysis and management.
Appl Energy 84:817-827
U.S. Green Building Council (2013), leadership in energy and environmental design (LEED)
Green building rating system. Available at.
http://www.usgbc.org/LEED
