Civil Engineering Reference
In-Depth Information
Bliss RW (1955) Design and performance of the nation's only fully solar-heated house. Air Cond
Heat Vent 52:92
Building Research Establishment (2013) BRE environmental assessment method, available at
Butti K, Perlin J (1980) A golden thread, 2,500 years of solar architecture and technology, Van
Nostrand Reinhold Company
CEN (2007a) BS EN 15316-4-3:2007, heating systems in buildings—method for calculation of
system energy requirements and system efficiencies—part 4-3: heat generation systems,
thermal solar systems
CEN (2007b) BS EN 15316-4-6:2007 heating systems in buildings—method for calculation of
system energy requirements and system efficiencies—part 4-6: heat generation systems,
photovoltaic systems
CEN (2008a) EN ISO 13790:2008 energy performance of buildings—calculation of energy use
for space heating and cooling (ISO 13790:2008)
CEN
(2008b)
EN
15603:2008
energy
performance
of
buildings—overall
energy
use
and
definition of energy ratings
CEN (2011) EN 15978:2011, sustainability of construction works—assessment of environmental
performance of buildings—calculation method
CEN (2012) EN 15804:2012 'sustainability of construction works—environmental product
declarations—core rules for the product category of construction products'
Cole RJ, Kernan PC (1996) Life-cycle energy use in office buildings. Build Environ 31:307-317
Crawford RH (2009) Life cycle energy and greenhouse emissions analysis of wind turbines and
the effect of size on energy yield. Renew Sustain Energy Rev 13:2653-2660
Crawford RH, Treloar GJ (2004) Net energy analysis of solar and conventional domestic hot
water systems in Melbourne, Australia. Sol Energy 76:159-163
Crawley DB, Hand JW, Kummert M, Griffith BT (2008) Contrasting the capabilities of building
energy performance simulation programs. Build Environ 43:661-673
CSTB (2012) ELODIE, software for analysis of building life cycle. Available at
www.elodie-
Dixit MK, Fernandez-Solís JL, Lavy S, Culp CH (2010) Identification of parameters for
embodied energy measurement: a literature review. Energy Build 42:1238-1247
ENERBUILCA (2012) Life cycle assessment for energy efficiency in buildings.
www.enerbuilca-
Esbensen TV, Korsgaard V (1977) Dimensioning of the solar heating system in the zero energy
house in Denmark. United States
EU Parliament and Council (2011) Regulation 305/2011 of the European parliament and of the
council
of
9
March
2011—laying
down
harmonised
conditions
for
the
marketing
of
construction products and repealing Council Directive 89/106/EEC
Haapio A, Viitaniemi P (2008) A critical review of building environmental assessment tools.
Environ Impact Assess Rev 28:469-482
Hammond GP, Jones CI (2008) Embodied energy and carbon in construction materials. In:
Proceedings of the institution of civil engineers—energy, vol 161(2), pp 87-98
Hannon B, Stein RG, Segal BZ, Serer D (1978) Energy and Labor in the construction sector.
Science 202:837-847
Hernandez P, Kenny P (2008a) Defining zero energy buildings—a life cycle perspective. PLEA
2008—25th conference on passive and low energy architecture. Dublin, Ireland
Hernandez P, Kenny P (2008b) Life cycle energy performance: exploring the limits of passive
'low energy' buildings. World sustainable building conference 2008. Melbourne, Australia
Hernandez P, Kenny P (2012) Net energy analysis of domestic solar water heating installations in
operation. Renew Sustain Energy Rev 16(1):170-177
Hopfe CJ (2009) Uncertainty and sensitivity analysis in building performance simulation for
decision support and design optimization. PhD thesis, University of Eindhoven, Department
of Building Engineering
