Civil Engineering Reference
In-Depth Information
American Institute of Steel Construction (22 June 2010).
Specification
for Structural Steel Buildings
. ANSI/AISC 360‑10. [Available at
www.aisc.org]
ASTM International (2004).
Standard Specification for Hot‑Formed
Welded and Seamless High‑Strength Low‑Alloy Structural Tubing
.
ASTM A618/A618M‑04. [Available at www.astm.org]
ASTM International (2010).
Standard Specification for Cold‑Formed
Welded and Seamless Carbon Steel Structural Tubing in Rounds and
Shapes
. ASTM A500/A500M‑10a. [Available at www.astm.org]
ASTM International (2011).
Standard Specification for General
Requirements for Rolled Structural Steel Bars, Plates, Shapes, and
Sheet Piling
. ASTM A6/A6M‑11. [Available at www.astm.org]
American references
American Society of Civil Engineers (2010).
Structural Applications of
Steel Cables for Buildings
. ASCE/SEI 19‑10. Reston, VA: ASCE.
American Society of Civil Engineers (2010).
Tensile Membrane
Structures
. ASCE/SEI 55‑10. Reston, VA: ASCE
Reinforced, post‑tensioned and precast concrete
European references
BSI (2009).
Execution of Concrete Structures
. London: BSI, London:
BSI, BS EN13670.
American references
ACI Committee 117 (2010).
Specification for Tolerances for Concrete
Construction and Materials and Commentary
. ACI 117‑10.
[Available at www.concrete.org]
ACI Innovation Task Group 7 (2009).
Specification for Tolerances for
Precast Concrete
. ITG‑7-09. [Available at www.concrete.org]
ASTM International (2008).
Standard Test Method for Determining
FF Floor Flatness and FL Floor Levelness Numbers
. ASTM
E1155M‑96. [Available at www.astm.org]
Precast/Prestressed Concrete Institute (2000).
Tolerance Manual for
Precast and Prestressed Concrete Construction
. MNL 135‑00.
[Available at www.pci.org]
Setting‑out
Codified general guidance documents
International Organization for Standardization (1989).
Measurement
Methods for Building: Setting‑Out and Measurement - Part 1:
Planning and Organization, Measuring Procedures, Acceptance
Criteria
. ISO 4463‑1. Geneva: ISO.
International Organization for Standardization (1985).
Building Cons‑
truction: Procedures for Setting Out, Measurement and Surveying -
Vocabulary and Guidance Notes
. ISO 7078. Geneva: ISO.
Reference documents
Smith, J. (1997).
The Management of Setting out in Construction:
ICE Design and Practice Guide
. London: Thomas Telford.
Construction Industry Research and Information Association (1997).
Setting‑Out Procedures
. Special Publication SP 145. London:
CIRIA.
Steelwork
European references
BCSA (2007).
National Structural Steelwork Specification,
, 5th edn.
London: British Constructional Steelwork Association.
BSI (1993).
Structural Steel I and H Sections: Tolerances on Shape
and Dimensions.
London: BSI, BS EN10034.
BSI (1995).
Hot Rolled Taper Flange I Sections: Tolerances on Shape
and Dimensions.
London: BSI, BS EN10024.
BSI (1999).
Specification for Structural Steel Equal and Unequal
Angles: Dimensions.
London: BSI, BS EN10056‑1.
BSI (2006).
Cold formed welded structural hollow sections of non‑
alloy and fine grain steels. Technical delivery requirements.
London: BSI, BS EN10219‑1.
BSI (2006).
Hot Finished Structural Hollow Sections of Non‑Alloy
and Fine Grain Steels: Technical Delivery Requirements.
London:
BSI, BS EN10210‑1.
BSI (2006).
Hot Finished Structural Hollow Sections of Non‑Alloy
and Fine Grain Steels: Tolerances, Dimensions and Sectional
Properties.
London: BSI, BS EN10210‑2.
BSI (2010).
Hot‑Rolled Steel Plates 3 mm Thick or Above: Tolerances
on Dimensions and Shape.
London: BSI, BS EN10029.
BSI (2011).
Execution of Steel Structures and Aluminium Structures:
Requirements for Conformity Assessment of Structural Components
.
London: BSI, BS EN1090‑1:2009+A1.
BSI (2011).
Execution of Steel Structures and Aluminium Structures:
Technical Requirements for Steel Structures
. London: BSI, BS
EN1090‑2:2008+A1.
Timber
European references
BSI (2008).
Eurocode 5: Design of Timber Structures - General:
Common Rules and Rules for Buildings
. London: BSI, BS
EN1995‑1‑1:2004+A1.
Dinwoodie, J. M. (2000).
Timber: Its Nature and Behaviour
, 2nd edn.
London: Spon.
Grantham, R. (2010).
Multi‑Storey Timber Frame Buildings: A
Design Guide (BR 454)
. London: IHS/BRE Press.
American references
American Institute of Timber Construction (2007).
American
National Standard, Structural Glued Laminated Timber
. ANSI/
AITC A190.1‑2007. [Available at www.aitc‑glulam.org]
American Institute of Timber Construction (2010).
Standard
for Dimensions of Structural Glued Laminated Timber
. AITC
113‑2010. [Available at www.aitc‑glulam.org]
National Institute of Standards and Technology (1996).
Construction
and Industrial Plywood
. Voluntary Product Standard PS 1‑95.
[Available at www.nist.gov]
National Institute of Standards and Technology (2004).
Performance
Standard for Wood‑Based Structural‑Use Panels
. Voluntary
Product Standard PS 2‑04. [Available at www.nist.gov]
American references
American Institute of Steel Construction (18 March 2005).
Code of
Standard Practice for Steel Buildings and Bridges
. AISC 303‑05.
[Available at www.aisc.org]
