Civil Engineering Reference
In-Depth Information
16.10 References
Ballast, D. K. (2007).
Handbook of Construction Tolerances
, 2nd
edn. New York: John Wiley.
BSI (1990).
Guide to Accuracy in Building.
London: BSI, BS 5606.
Canadian General Standards Board (1989).
Structural Design of
Glass for Buildings
. CAN/CGSB‑12.20‑M89. [Available at www.
nrc‑cnrc.gc.ca]
Glass Association of North America (2008).
GANA Glazing Manual
.
[Available at www.glasswebsite.com]
Glass Association of North America (2010).
GANA Guide to
Architectural Glass
. [Available at www.glasswebsite.com]
GlassAssociation of NorthAmerica (2010).
GANA/PGC International
Protective Glazing Manual
. [Available at www.glasswebsite.com]
16.10.1 Further reading
Aluminium
European references
BSI (2011).
Eurocode 9: Design of Aluminium Structures - Structures
Susceptible to Fatigue
. London: BSI, BS EN1999‑1‑3:2007+A1.
BSI (2011).
Execution of Steel Structures and Aluminium Structures:
Requirements for Conformity Assessment of Structural Components
.
London: BSI, BS EN1090‑1:2009+A1.
BSI (2011).
Execution of Steel Structures and Aluminium Structures:
Technical Requirements for Steel Structures
. London: BSI, BS
EN1090‑2:2008+A1.
Masonry
European references
BSI (2006).
Selection and Execution of Masonry
. London: BSI, BS
EN1996‑2.
BSI (2010).
Design Recommendations for Masonry Structures to BS
EN1996‑1‑1 and BS EN1996‑2
. London: BSI, PD 6697.
Morton, J. (1998).
Design for Movement in Brickwork
. Brick
Development Association (BDA) Design Note 10. [Available at
www.brick.org.uk/]
American references
Aluminum Association (2010).
Aluminum Design Manual
. Arlington,
VA: Aluminum Association.
Kissell, J. R. and Ferry, R. L. (2002).
Aluminium Structures: A Guide to
Their Specifications and Design
, 2nd edn. New York: John Wiley.
American references
ACI/ASCE/TMS (2011).
Building Code Requirements and
Specification for Masonry Structures and Related Commentaries
.
ACI 530/530.1-11. [Available at www.concrete.org]
ASTM International (2007).
Standard Specification for Precast
Autoclaved Aerated Concrete (AAC) Wall Construction Units
.
ASTM C1386‑07. [Available at www.astm.org]
ASTM International (2010).
Standard Specification for Building
Brick (Solid Masonry Units Made From Clay or Shale)
. ASTM
C62‑10. [Available at www.astm.org]
ASTM International (2011).
Standard Practice for Construction and
Testing of Autoclaved Aerated Concrete (AAC) Masonry
. ASTM
C1692‑11. [Available at www.astm.org]
ASTM International (2011).
Standard Specification for Concrete
Building Brick
. ASTM C55‑11. [Available at www.astm.org]
ASTM International (2011).
Standard Specification for Facing Brick
(Solid Masonry Units Made from Clay or Shale)
. ASTM C216‑11.
[Available at www.astm.org]
ASTM International (2011).
Standard Specification for Hollow
Brick (Hollow Masonry Units Made From Clay or Shale)
. ASTM
C652‑11. [Available at www.astm.org]
ASTM International (2011).
Standard Specification for Loadbearing
Concrete Masonry Units
. ASTM C90‑11b. [Available at www.
astm.org]
ASTM International (2011).
Standard Specification for
Nonloadbearing Concrete Masonry Units
. ASTM C129‑11.
[Available at www.astm.org]
ASTM International (2011).
Standard Specification for Prefaced
Concrete and Calcium Silicate Masonry Units
. ASTM C744‑11.
[Available at www.astm.org]
General movement and tolerances
Ballast, D. K. (2007).
Handbook of Construction Tolerances
, 2nd
edn. New York: John Wiley.
BSI (1990).
Guide to Accuracy in Building
. London: BSI, BS 5606.
BSI (2007).
Collaborative Production of Architectural, Engineering
and Construction Information: Code of Practice
. London: BSI, BS
1192.
Latta, J. K. (1975). Inaccuracies in construction.
Canadian Building
Digest
,
171
(April). National Research Council Canada. [Available
at
www.nrc‑cnrc.gc.ca,
www.nrc‑cnrc.gc.ca/eng/ibp/irc/cbd/
building‑digest‑171.html]
Glass
European references
IStructE (1999).
Structural Use of Glass in Buildings
. London:
IStructE.
Canadian and American references
ASTM International (2004).
Standard Specification for Heat‑Treated
Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass
.
ASTM C1048‑04. [Available at www.astm.org]
ASTM International (2009).
Standard Practice for Determining Load
Resistance of Glass in Buildings
. ASTM E1300‑09a. [Available at
www.astm.org]
ASTM International (2009).
Standard Specification for Laminated
Architectural Flat Glass
. ASTM C1172‑09e1. [Available at www.
astm.org]
ASTM International (2010).
Standard Specification for Chemically
Strengthened Flat Glass
. ASTM C1422/C1422M‑10. [Available at
www.astm.org]
ASTM International (2011).
Standard Specification for Bent Glass
.
ASTM C1464‑06 [Available at www.astm.org]
ASTM International (2011).
Standard Specification for Flat Glass
.
ASTM C1036‑11. [Available at www.astm.org]
Membrane tensile structures
European references
Forster, B. and Mollaert, M. (2004).
The European Design Guide for
Tensile Surface Structures
. Brussels: Tensinet.
Seidel, M. (2009).
Tensile Surface Structures: A Practical Guide to
Cable and Membrane Construction
. New York: John Wiley.
