Graphics Reference
In-Depth Information
23.
Draw another sketch on the outer face of the contour flange.
24.
Activate the
Tab
command and create a tab feature using the sketch.
25.
Draw a line on the outer face of the tab feature. Activate the
Jog
command
(click
Home > Bend > More > Jog
on the ribbon) and click on the sketched
line.
26.
On the
Jog
dialog, select
Height Reference > Outside
and
Inset > Material
Outside
.
27.
Type-in
20
in the
Height
box and click
OK
to add jog to the tab feature.
28.
On the ribbon, click
Home > Form > Resize Bend Angle
.
29.
Click on the outer face of the contour flange feature to define the stationary
face.
30.
Click on the lower bend of the jog feature and type-in
135
in the
Angle
box.
Click
Apply
.