Graphics Reference
In-Depth Information
Lofted Flange
The
Lofted Flange
command creates a lofted flange that can be unfolded into flat pattern.
Create two sketches on planes parallel to each other. Ensure that the sketches are not closed.
In addition, the openings should be in the same direction.
Activate the
Lofted Flange
command (click
Home > Bend > More > Lofted Flange
on
the ribbon) click on the first cross section. On the
Lofted Flange
dialog, under
End Sec-
tion
, click
Select Curve
. Click on the second cross section. Click
OK
to complete the lofted
flange.
Create the flat pattern of the sheet metal part.