Graphics Reference
In-Depth Information
10.
Click
Home > Feature > Pattern Feature
on the ribbon.
11.
Click on the
Cutout
in the part geometry.
12.
On the
Pattern Feature
dialog, select
Layout > Linear
.
13.
Under the
Direction 1
section, click
Specify Vector,
and then click on the
top front edge of the part geometry.
14.
Under the
Direction 2
section, check the
Use Direction 2
option and click
on the top side edge of the part geometry.
15.
Under the
Direction 1
section, select
Spacing > Count and Span
.
16.
Type-in
2
and
100
in the
Count
and
Span Distance
boxes, respectively.
17.
Under the
Direction 2
section, select
Spacing > Count and Span
.
18.
Type-in
2
and
55
in the
Count
and
Span Distance
boxes, respectively. Click
Apply
to complete the pattern feature.
19.
Likewise, pattern the counterbored hole. The pattern parameters are same.