3D PRINTING AND PATTERNING VASCULATURE IN ENGINEERED TISSUES - 3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine - page 182

Golden, A.P., Tien, J., 2007. Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element.
Lab on a chip 7 (6), 720-725, Available at: http://www.ncbi.nlm.nih.gov/pubmed/17538713 [Accessed January
26, 2014].
Gou, M., et al., 2014. Bio-inspired detoxiication using 3D-printed hydrogel nanocomposites. Nature
communications 5, 3774, Available at: http://www.nature.com/ncomms/2014/140508/ncomms4774/full/
ncomms4774.html?message-global=remove [Accessed May 26, 2014] .
Hahn, M.S., Miller, J.S., West, J.L., 2006. Three-Dimensional Biochemical and Biomechanical Patterning of
Hydrogels for Guiding Cell Behavior. Advanced Materials 18 (20), 2679-2684, Available at: http://dx.doi.
org/10.1002/adma.200600647 .
Hansen, C.J., et al., 2013. High-throughput printing via microvascular multinozzle arrays. Advanced materials
(Deerfield Beach, Fla.) 25 (1), 96-102, Available at: http://www.ncbi.nlm.nih.gov/pubmed/23109104
[Accessed February 21, 2014].
Harley, B.a, et al., 2010. Design of a multiphase osteochondral scaffold III: Fabrication of layered scaffolds
with continuous interfaces. Journal of biomedical materials research. Part A 92 (3), 1078-1093, Available
at: http://www.ncbi.nlm.nih.gov/pubmed/19301263 [Accessed July 2, 2014].
Hasan, A., et al., 2014. Microfluidic techniques for development of 3D vascularized tissue. Biomaterials 35 (26),
7308-7325, Available at: http://linkinghub.elsevier.com/retrieve/pii/S014296121400489X [Accessed July 1,
2014].
He, J., et al., 2013. Fabrication of nature-inspired microfluidic network for perfusable tissue constructs. Advanced
healthcare materials 2 (8), 1108-1113, Available at: http://www.ncbi.nlm.nih.gov/pubmed/23554383
[Accessed June 25, 2014].
Hockaday, L.a, et al., 2012. Rapid 3D printing of anatomically accurate and mechanically heterogeneous aortic
valve hydrogel scaffolds. Biofabrication 4 (3), 035005, Available at: http://www.pubmedcentral.nih.gov/
articlerender.fcgi?artid=3676672&tool=pmcentrez&rendertype=abstract [Accessed January 30, 2014] .
Jakab, K., et al., 2008. Tissue engineering by self-assembly of cells printed into topologically defined structures.
Tissue engineering. Part A 14 (3), 413-421, Available at: http://www.ncbi.nlm.nih.gov/pubmed/18333793
[Accessed January 30, 2014].
Jun, H.-W., West, J.L., 2005. Endothelialization of microporous YIGSR/PEG-modified polyurethaneurea. Tissue
engineering 11 (7-8), 1133-1140, Available at: http://www.ncbi.nlm.nih.gov/pubmed/16144449 .
Kanchanawong, P., et al., 2010. Nanoscale architecture of integrin-based cell adhesions. Nature 468 (7323),
580-584, Available at: http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3046339&tool=pmcentrez
&rendertype=abstract [Accessed May 26, 2014] .
Kane, R.S., et al., 1999. Patterning proteins and cells using soft lithography. Biomaterials 20 (23-24), 2363-2376,
Available at: http://www.ncbi.nlm.nih.gov/pubmed/10614942 [Accessed June 20, 2014].
Kim, S., et al., 2013. Engineering of functional, perfusable 3D microvascular networks on a chip. Lab on a chip 13
(8), 1489-1500, Available at: http://pubs.rsc.org/EN/content/articlehtml/2013/lc/c3lc41320a [Accessed June
6, 2014] .
King, K.R., et al., 2004. Biodegradable Microfluidics. Advanced Materials 16 (22), 2007-2012, Available at:
http://doi.wiley.com/10.1002/adma.200306522 [Accessed February 8, 2014].
Kolesky, D.B., et al., 2014. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs.
Advanced materials (Deerfield Beach, Fla.) 26 (19), 3124-3130, Available at: http://www.ncbi.nlm.nih.gov/
pubmed/24550124 [Accessed June 26, 2014].
Lee, S.-H., Moon, J.J., West, J.L., 2008. Three-dimensional micropatterning of bioactive hydrogels via two-photon
laser scanning photolithography for guided 3D cell migration. Biomaterials 29 (20), 2962-2968, Available at:
http://www.ncbi.nlm.nih.gov/pubmed/18433863 [Accessed February 28, 2014].
Lin, H., et al., 2013. Application of visible light-based projection stereolithography for live cell-scaffold fabrication
with designed architecture. Biomaterials 34 (2), 331-339, Available at: http://www.pubmedcentral.nih.gov/
articlerender.fcgi?artid=3612429&tool=pmcentrez&rendertype=abstract [Accessed February 28, 2014] .