Interactions between Wastes and Binders - Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes - page 170

remain unknown, particularly for less common contaminants. However, it is clear that
the chemical environment provided in a cement-based product, which dictates contam-
inant solubility, can be adjusted to a limited degree by formulation optimization.

ACKNOWLEDGMENTS

I would like to acknowledge helpful comments received from the editors and the
support of the Centre for Ecology and Hydrology Wallingford in writing this chapter.

REFERENCES

1. USEPA (1990), 40 CFR, June 1, page 22568.

2. Trussell, S. and Spence, R.D. (1994), A review of solidification/stabilization inter-

ferences, Waste Management , 14, 6, pp. 507-519.

3. Mattus, C.H. and Mattus, A.J. (1996), Literature review of the interaction of select

inorganic species on the set and properties of cement and methods of abatement
through waste pretreatment, in Stabilization and Solidification of Hazardous, Radio-
active and Mixed Wastes: 3rd Volume , ASTM STP 1240, T. Michael Gilliam and
Carlton C. Wiles, Eds., American Society for Testing and Materials.

4. Taylor, H.F.W. (1990), Cement Chemistry , Academic Press, London.

5. Massazza, F. and Testolin, M. (1980), Latest developments in the use of admixtures

for cement and concrete, Il Cemento , 2, pp. 73-146.

6. Jones, L.W. (1990), Interference Mechanisms in Waste Stabilization/Solidification

Processes — Literature Review, EPA/600/2-89/067, US Army Corps of Engineers
Waterways Experiment Station, Vicksburg, MS.

7. Cox, J.D. and Sharp, J.H. (1994), The use of admixtures with calcium aluminate

cements, Proceedings of the ConChem International Exhibition and Conference ,
Karlsruhe, Germany, pp. 381-398.

8. Mattus, C.H. and Gilliam, T.M. (1994), A Literature Review of Mixed Waste Com-

ponents: Sensitivities and Effects upon Solidification/Stabilization in Cement-based
Matrices, ORNL/TM-12656, Oak Ridge National Laboratory, Oak Ridge, TN.

9. Conner, J.R. (1997), Guide to Improving the Effectiveness of Cement-based Stabili-

zation/Solidification , C.M. Wilk, Ed., Portland Cement Association, Skokie, IL.

10. Hills, C.D. and Pollard, S.J.T. (1997), The influence of interference effects on the

mechanical, microstructural and fixation characteristics of cement-solidified hazard-
ous waste forms, Journal of Hazardous Materials , 52, pp. 171-191.

11. Stegemann, J.A., Caldwell, R.J., and Shi, C. (1994), Response of Various Solidifica-

tion Systems to Acid Addition, presented at WASCON '94, Maastricht, The Nether-
lands.

12. Stegemann, J.A., Perera, A.S., Cheeseman, C., and Buenfeld, N.R. (2000), 1/8 frac-

tional factorial design investigation of metal effects on cement acid neutralisation
capacity, Journal of Environmental Engineering , 126, 10.

13. Stegemann, J.A. and Buenfeld, N.R. (2002), Prediction of leachate pH for cement

paste containing pure metal compounds, Journal of Hazardous Materials , B90, pp.
169-188.

14. Polettini, A., Pomi, R., and Sirini, P. (2002), Fractional factorial design to investigate

the influence of heavy metals and anions on acid neutralization behavior of cement-
based products, Environmental Science and Technology , 36, 7, pp. 1584-1591.