Information Technology Reference
In-Depth Information
CCNA prerequisite, we assume you have a grasp of these fundamentals. To configure
DHCP subnets, navigate to System > DHCP > DHCP Subnet. Click
Add New
to create
subnets; you can create multiple subnets as needed for your environment design. On the
Subnet Configuration page, select the server from the DHCP Server drop-down list. You
can then configure the following (some other settings are not listed):
Subnet address
■
Primary range start IP
■
Primary range end IP
■
Primary router IP address (default gateway)
■
Subnet mask
■
Primary DNS server IP address
■
TFTP server IP address
■
Remember that settings in the subnet configuration override the same settings in the
server configuration. Figure 9-3 shows the DHCP Subnet Configuration page.
Figure 9-3
DHCP Subnet Configuration