Rooms and Color Fill Plans - Autodesk Revit Architecture 2015 Essentials - page 199

5. Click OK. One room in the schedule displays Not Placed in the Area
column.



There are filters in the
ribbon to show, hide,
or isolate not placed
or unenclosed rooms
when you are viewing
a room schedule. These
filters are useful when
you want to perform
quality control on your
project and quickly
clean up not placed
rooms.

6. To replace the room you just deleted, return to the Level 1 floor plan,
and start the Room command again. This time, open the Room drop-
down on the Options Bar. You see any unplaced rooms available in
your project (Figure 8.11).

7. Select the unplaced room from the list, and place the room back in
the floor plan.

Figure 8.11 Place rooms with unplaced room definitions.

8. Return to the schedule you created by locating the Schedules/Quantities
category in the Project Browser and opening the Room Schedule.

9. Highlight the name field for the first unnamed room object, and
modify the value to read Large Meeting . Practice renaming all the
remaining rooms, either in the schedule or in the floor plan, as shown
in Figure 8.12, naming the spaces appropriate to their function.

Figure 8.12 Renaming rooms
in a room schedule