Graphics Reference
In-Depth Information
After the first piece of geometry is repaired, repeat the process on the other three pieces. With all of these
circular pieces repaired, the edges will need to be sharpened to complete this section of the model. Follow
these steps:
1.
Select two edges at the peak of the outer rim as well as the two edges at the peak of the inner rim.
2.
With these four edges selected, press the L key to select the loops completely.
3.
Once again, make sure that the Subdivision Weight map is selected and then press Shift+W to activ-
ate the Vertex Map Weight tool.
Figure 5-13
shows these edges weighted at 18%.
Figure 5-13:
Rounded edges sharpened
