Biomedical Engineering Reference
In-Depth Information
[11] M. H. Gerardi, Settleability
Problems and Loss of Solids in the Activated Sludge
Process,
Wiley Interscience, Hoboken, New Jersey, 2002.
[12] M. Boller and S. Blaser, Particles under stress,
Water Sci. Technol.,
37
(10) (1998), 9-
29.
[13] P. Jarvis, B. Jefferson, J. Gregory and S. A. Parsons, A review of floc strength and
breakage,
Water
Res.,
39
(2005), 3121-3137.
[14] P. H. Nielsen, T. R. Thomsen and J. L. Nielsen, Bacterial composition of activated
sludge-impotance for floc and sludge properties,
Water Sci. Technol
.,
49
(10) (2004),
51-58.
[15] I. Takács and E. Fleit, Modelling of the Micromorphology of the Activated Sludge Floc:
Low DO, Low F/M Bulking
, Water Sci. Technol
.,
31
(2) (1995), 235-243.
[16] M. K. Stenstrom and R. A. Poduska, The Effect of Dissolved Oxygen Concentration on
Nitrification,
Water Res.,
14
(1980), 643-649.
[17] B. Li and P. L. Bishop, Micro-profiles of activated sludge floc determined using
microelectrodes,
Water Res
.,
38
(2004), 1248-1258.
[18] J. Pérez, C. Picioreanu and M. C. M. van Loosdrecht, Modeling biofilm and floc
diffusion processes based on analytical solutions of reaction-diffusion equations,
Water
Res
.,
39
(2005), 1311-1323.
[19] M. Beccari, A. C. Di Pinto, R. Ramadori and M. C. Tomei, Effects of dissolved oxygen
and diffusion resistance on nitrification kinetics,
Water Res
.,
26
(8) (1992), 1099-1104.
[20] K. H. Chu, H. van Veldhuizen and M. C. M. van Loosdrecht, Respirometric
measurement of kinetic parameters: effect of activated sludge floc size,
Water Sci.
Technol
.,
48
(8) (2003), 61-68.
[21] S. Wuertz and C. M. Falkentoft, Modeling and Simulation: Introduction, in: Biofilms in
Wastewater Treatment - An Interdisciplinary Approach, S. Wuertz, P. L. Bishop and P.
A. Wilderer (ed.), IWA Publishing, London, 2003.
[22] O. Wanner, New Experimental Findings and Biofilm Modelling Concepts,
Water Sci
.
Technol
.,
32
(8) (1995), 133-140.
[23] O. Wanner and W. Gujer, A Multispecies Biofilm Model,
Biotechnology and
Bioengineering
,
28
(1986), 314-328.
[24] O. Wanner and P. Reichert, Mathematical Modeling of Mixed-Culture
Biofilms
,
Biotechnology and Bioengineering
,
49
(1996), 172-184.
[25] D. de Beer and P. Stoodley, Relation between the structure of an aerobic biofilm and
transport phenomena,
Water Sci. Technol
.,
32
(8) (1995), 11-18.
[26] Y. S. Park, J. W. Yun and S. K. Song, Biofilm properties under different substrate
loading rates in a rotating biological contactor,
Biotechnology Techniques
,
12
(8) (1998),
587-590.
[27] S. W. Hermanowicz, A model of two-dimensional biofilm morphology,
Water Sci.
Technol
.,
37
(4-5) (1998), 219-222.
[28] S. W. Hermanowicz, Two-dimensional simulations of biofilm development: effects of
external environmental conditions,
Water Sci. Technol
.,
39
(7) (1999), 107-114.
[29] C. Picioreanu, M. C. M. Van Loosdrecht and J. J. Heijnen, Dicrete-differential
modelling of biofilm structure,
Water Sci. Technol
.,
39
(7) (1999), 115-122.
[30] C. Picioreanu, M. C. M. Van Loosdrecht and J. J. Heijnen, Two-Dimensional Model of
Biofilm Detachment Caused by Internal Stress from Liquid Flow,
Biotechnology and
Bioengineering
,
72
(2) (2001), 205-218.
