Release from Composites by Mechanical and Thermal Treatment - Safety of Nanomaterials along Their Lifecycle - page 273

Guiot, A., Golanski, L., Tardif, F. (2009). Measurement of nanoparticle removal by abrasion.
J Phys Conf Ser 170:012014.
Hirth, S., Cena, L., Cox, G., Tomovic, Z., Peters, T., Wohlleben, W. (2013). Scenarios and
methods that induce protruding or released CNTs after degradation of composite materi-
als. J Nanopart Res 15: 1504.
Huang, G., Park, J., Cena, L., Shelton, B., Peters, T. (2012). Evaluation of airborne particle
emissions from commercial products containing carbon nanotubes. J Nanoparticle Res
14: 1-13.
ISO 12136:2011. Reaction to fire tests-Measurement of fundamental material properties using
a fire propagation apparatus.
Johnson, D. R., Methner, M. M., Kennedy, A. J., Steevens, J. A. (2010). Potential for
Occupational Exposure to Engineered Carbon-Based Nanomaterials in Environmental
Laboratory Studies. Environ Health Perspect 118(1):49-54.
Koponen, I. K., Jensen, K. A., Schneider, T. (2011). Comparison of dust released from sanding
conventional and nanoparticle-doped wall and wood coatings. J Exposure Sci Environ
Epidemiol 21: 408-418.
Le Bihan, O., Shandilya, N., Gheerardyn, L., Guillon, O., Dore, E., Morgeneyer, M. (2013).
Investigation of the release of particles from nanocoated product. Adv Nanopart 2:
39-44.
Lee, J., Mahendra, S., Alvarez, P. J. J. (2010). Nanomaterials in the construction industry: A
review of their application and environmental health and safety considerations. ACS
Nano 4(7): 3580-3590.
Motzkus, C., Chivas-Joly, C., Guillaume, E., Ducourtieux, S., Saragoza, L., Lesenechal, D.,
Mace, T., Lopez-Cuesta, J.-M., Longuet, C. (2012). Aerosol emitted by the combustion
of polymers containing nanoparticles. J Nanoprt Res 14: 687.
Orhan, T., Isitman, N. A., Hacaloglu, J., Kaynak, C. (2012). Thermal degradation of organo-
phosphorus flame-retardant poly(methyl-methacrylate) nanocomposites containing
nanoclay and carbon nanotubes. Polym Degrad Stabil 97: 273-280.
Park, J., Kwak, B. K., Bae, E., Lee, J., Kim, Y., Choi, J. Y. (2009). Characterization of exposure
to silver nanoparticles in a manufacturing facility. J Nanoprt Res 11: 1705-1712.
Peng, Z., Kong, L. X. (2007). A thermal degradation mechanism of polyvinyl alcohol/silica
nanocomposites. Polym Degrad Stabil 92: 1061-1071.
Pramoda, K. P., Liu, T., Liu, Z., He, C., Sue, HJ. (2003). Thermal degradation behavior of
polyamide 6/clay nanocomposites. Polym Degrad Stabil 81: 47-56.
Sachse, S., Gendre, L., Silva, F., Zhu, H., Leszczyn´ska, A., Pielichowski, K., Ermini, V.,
Njuguna, J. (2013b). On Nanoparticles Release from Polymer Nanocomposites for
Applications in Lightweight Automotive Components. J Phys Conf Ser 429: 012046.
Sachse, S., Njugana, J., Michaowski, S., Leszczynska, A., Pielichowski, K., Zhu, H. (2013a).
The release of nanofillers from polymer matrix: Case studies on polypropylene, polyam-
ide and polyurethane nanocomposites. NanoProduct Rev J 1: 11.
Sachse, S., Silva, F., Zhu, H., Irfan, A., Leszczynska, A., Pielichowski, K., Ermini, V.,
Blazquez, M., Kuzmenko, O., Njuguna, J. (2012). The effect of nanoclay on dust gen-
eration during drilling of PA6 nanocomposites. J Nanomaterials 189386.
Schlagenhauf, L., Chu, B. T. T., Buha, J., Nüesch, F., Wang, J. (2012). Release of carbon
nanotubes from an epoxy-based nanocomposite during an abrasion process. Environ Sci
Technol 46: 7366-7372.
Schneider, T., Brouwer, D. H., Koponen, I. K., Jensen, K. A., Fransman, W., Van Duuren-
Stuurman, B., Van Tongeren, M., Tielemans, E. (2011). Conceptual model for assess-
ment of inhalation exposure to manufactured nanoparticles. J Expos Sci Environ
Epidemiol 21(5): 450-463.
Schneider, T., Jensen, K. A. (2008). Combined single-drop and rotating drum dustiness test of
fine to nanosize powders using a small drum. Ann Occup Hyg 52(1): 23-34.