Release from Composites by Mechanical and Thermal Treatment - Safety of Nanomaterials along Their Lifecycle - page 272

REFERENCES
Bello, D., Wardle, B. L., Yamamoto, N., de Villoria, R. G., Garcia, E. J., Hart, A. J., Ahn, K.,
Ellenbecker, M. J., Hallock, M. (2009a). Exposure to nanoscale particles and fibers dur-
ing machining of hybrid advanced composites containing carbon nanotubes. J Nanopart
Res 11: 231-249.
Bello, D., Wardle, B. L., Yamamoto, N., de Villoria, R. G., Hallock, M. (2009b). Exposures
to nanoscale particles and fibers during handling, processing, and machining of nano-
composites and nanoengineered composites reinforced with aligned carbon nanoturbes.
International Committee on Composite Materials 17, Edinburgh, Scotland.
Bello, D., Wardle, B. L., Zhang, J., Yamamoto, N., Santeufemio, C., Hallock, M., Virji, M. A.
(2010). Characterization of exposures to nanoscale particles and fibers during solid core
drilling of hybrid carbon nanotube advanced composites. Int J Occup Environ Health
16(4): 434-450.
Bouillard, J. X., R'Mili, B., Moranviller, D., Vignes, A., Le Bihan, O., Ustache, A., Bomfim, J.
A. S., Frejafon, E., Fleury, D. (2013). Nanosafety by design: Risks from nanocomposite/
nanowaste combustion. J Nanopart Res 15:1519.
Calogine, D., Marlair, G., Bertrand, J-P., Duplantier, S., Lopez-Cuesta, J-M., Sonnier, R.,
Longuet, C., Minisini, C., Chivas-Joly, C., Guillaume, E., Parisse, D. (2011). Gaseous
effluents from the combustion of nanocomposites in controlled-ventilation conditions.
J Phys Conf Ser 304: 012019.
Canady, R., Kuhlbusch, T., Renker, M., Lee, E., Tsytsikova, L. (2013). NanoReleasePhase 2.5
Report: Comparison of existing studies of release measurements of MWCNT-polymer
composites. ILSI, USA: pp. 44.
Cena, L., Peters, T. (2011). Characterization and control of airborne particles emitted during
production of epoxy/carbon nanotube nanocomposites. J Occup Environ Hyg 8: 86-92.
Chrissafis, K., Antoniadis, G., Paraskevopoulos, K. M., Vassiliou, A., Bikiaris, D. N. (2007).
Comparative study of the effect of different nanoparticles on the mechanical properties
and thermal degradation mechanism of in situ prepared poly(caprolactone) nanocom-
posites. Composites Sci Technol 67: 2165-2174.
Costache, M. C., Wang, D., Heidecker, M. J., Manias, E., Wilkie, C. A. (2006). The thermal
degradation of pol(methyl methacrylate) nanocomposites with montmorillonite, layered
double hydroxides and carbon Nanotubes. Polym Adv Technol 17: 272-280.
Dahm, M., Evans, D., Schubauer-Berigan, M., Birch, M., Fernback, J. (2012). Occupational
exposure assessment in carbon nanotube and nanofiber primary and secondary manufac-
turers. Ann Occup Hyg 56: 542-556.
Derrough, S., Raffin, G., Locatelli, D., Nobile, P., Durand, C. (2013). Behaviour of nanoparti-
cles during high temperature treatment (Incineration type), J Phys Conf Ser 429:012047.
EN 15051 2006. Workplace atmospheres— measurement of the dustiness of bulk materials—
requirements and reference test methods. Brussels, Belgium: European Committee for
Standardization.
Evans, D. E., Turkevich, L. A., Roettgers, C. T., Deye, G. J., Baron, P. A. (2013). Dustiness of
Fine and Nanoscale Powders. Ann Occup Hyg 57 (2): 261-277.
Fleury, D., Bomfim, J. A. S., Vignes, A., Girard, C., Metz, S., Muñoz, F., R'Mili, B., Ustache,
A., Guiot, A., Bouillard, J. (2013). Identification of the main exposure scenarios in the
production of CNT-polymer nanocomposites by melt-mouldingprocess. J Clean Prod
53: 22-36.
Göhler, D., Stintz, M., Hillemann, L., Vorbau, M. (2010). Characterization of nanoparticle
release from surface coatings by the simulation of a sanding process. Ann Occup Hyg
54:615-624.
Golanski L., Guiot A., Pras M., Malarde M., Tardif F. (2012). Release-ability of nano fillers from
different nanomaterials (toward the acceptability of nanoproduct). J Nanopart Res 14: 1-9.