Geoscience Reference
In-Depth Information
•
Vaughan P.R., Chandler R.J., Apted J.P., Maguire W.M. and Sandroni S.S. (1993),
“Sampling Disturbance - with particular reference to its effect on stiff clays'' In
Predictive Soil Mechanics, Ed. G.T. Houlsby and A.N. Schofield, Thomas Telford
Publishers London, pp 685-708.
•
Vaughan P.R. (1994), “Assumption, Prediction and reality in Geotechnical
Engineering'' Geotechnique Vol. 44, No. 4, pp 573-609.
•
Walkinshaw J.L. and Santi P.M. (1996), “Shales and Other Degradable Mater-
ials'' Transportation Research Board, Landslides: Investigations and Mitigation,
Special Report 247, National Academy Press, Washington, pp 555-576.
25.3 Geotechnical analysis and design
•
Angell D.J. (1988), “Technical Basis for the Pavement Design Manual'' Queens-
land Main Roads, Pavements Branch, Report RP165.
•
Australian Standard (AS 2870 - 1988), “Residential Slabs and Footings Part 1:
Construction'' Standards Australia.
•
Australian Standard (AS 2870 - 1990), “Residential Slabs and Footings Part 2:
Guide to design by engineering principles'' Standards Australia.
•
Australian Standard (AS3774 - 1996), “Loads on bulk solids containers''
Standards Australia.
•
Australian Standard (AS4678 - 2002), “Earth Retaining Structures'' Standards
Australia.
•
AUSTROADS (2004), “Pavement Rehabilitation - a guide to the design of
rehabilitation treatments for road pavements'' Standards Australia.
•
Austroads (1990), “Guide To Geotextiles'' Technical Report.
•
Australian National Committee of Irrigation and Drainage (2001), “Open Chan-
nel Seepage and Control'' Volume 2.1: Literature Review of earthen channel
seepage.
•
BartonN., Lien R. and Lunde J. (1974), “Engineering Classification of rockmasses
for design of tunnel support'' Rock Mechanics, No. 6, pp 189-239, Norwegian
Geotechnical Institute Publishers.
•
Barton N. (2006), “Lecture Series on Rock Mechanics and Tunnelling'' School of
Engineering, Griffith University, Gold Coast Campus.
•
Bell F.G. (1992), “Open excavation in rock masses'' Chapter 21 in Engineering in
Rock Masses edited by FG Bell, Butterworth Heinemann.
•
Bell F.G. (1998), “Environmental Geology - Principles and Practice'' Blackwell
Science.
•
Boscardin M.G. and Cording E.J. (1989), “Building response to excavation
induced settlement'', Journal of Geotechnical engineering, ASCE, Vol. 124, No.5,
pp 463-465.
•
Bishnoi B.L. (1968), “Bearing Capacity of a closely Jointed Rock'' PhD Disserta-
tion, Georgia Institute of Technology, Atlanta.
•
BozozukM. (1978), “Bridge FoundationsMove'' Transportation Research Record
678, Transportation Research Board, Washington, pp 17-21.
Search WWH ::
Custom Search