Geoscience Reference
In-Depth Information
•
Kulhawy F.H. and Mayne P.W. (1990), “Manual on estimating soil properties
for foundation design'' Report EL - 6800, Electric Power Research Institute,
California.
•
Ladd C.C., Foote R., Ishihara K., Schlosser F. and Poulos H.G. (1977), “Stress -
deformation and strength characteristics'', State of the art report, Proceedings of
the 9th International Conference on Soil Mechanics and Foundation Engineering,
Volume 2, pp 421-494.
•
Lee I.K., White W. and Ingles O.G. (1983), “Geotechnical Engineering'' Pitman
Publishers.
•
Look B.G. (1997). “The Standard Penetration Test Procedure in Rock'' Australian
Geomechanics Journal. No. 32, December pp 66-68.
•
Look B.G. (2004), “Effect of Variability and Disturbance in the measure-
ment of Undrained Shear Strength'' 9th Australia New Zealand Conference in
Geomechanics, Auckland, New Zealand, Vol. 1, pp 302-308.
•
Look B.G. and Griffiths S.G. (2004), “Characterization of rock strengths in
south east Queensland'' 9th Australia New Zealand conference in Geomechanics,
Auckland, New Zealand, pp 187-194.
•
Look B.G. and Griffiths S.G. (2004), “Rock strength properties in south east
Queensland'' 9th Australia New Zealand conference in Geomechanics, Auckland,
New Zealand, pp 196-203.
•
Look B.G. (2005), “Equilibrium Moisture Content of volumetrically active clay
earthworks in Queensland'' Australian Geomechanics Journal, Vol. 40, No. 3,
pp 55-66
•
Marchetti S. (1980), “In situ tests by the flat Dilatometer'' Journal of Geotechnical
Engineering, ASCE, Vol. 106, GT3, pp 299-321.
•
Marchetti S. (1997), “The Flat Dilatometer: Design Applications'' Proceedings of
the 3rd International Geotechnical Engineering Conference, Cairo, pp 421-448.
•
Marsh A.H. (1999), “Divided Loyalties'' January, Ground Engineering, p 9.
•
Meigh A.C. (1987), “Cone Penetration Testing: Methods and Interpretation''
CIRIA Ground Engineering Report: In - situ Testing.
•
MTRD Report No. 2-2 (1994), “Precision of soil compaction tests: Maximum
dry density and optimummoisture content'' Department of Road Transport, South
Australia.
•
NAVFAC (1986), “Soil Mechanics'' Design Manual 7.01, Naval Facilities Engin-
eering Command, Virginia
•
NAVFAC (1986), “Foundations and Earth Structures Design Manual'' Design
Manual DM 7.02, Naval Facilities Engineering Command, Virginia.
•
Patton F.D. (1966), “Multiple Modes of Shear Failure in Rock'' Proceedings
1st Congress of the International Society for Rock Mechanics, Lisbon, Vol. 1,
pp 509-513.
•
Peck R.B., Hanson W.E. and Thornburn T.H. (1974), “Foundation Engineering''
2nd Edition, John Wiley and Sons, New York.
•
Phoon K. and Kulhawy F.H. (1999), “Characterization of geotechnical variability''
Canadian Geotechnical Journal, Volume 36, pp 612-624.
•
Powell W.D., Potter J.F., Mayhew H.C. and Nunn M.E. (1984), “The Structural
Design of Bituminous Roads'' Transportation Road Research Laboratory Report
RL 1132, TRL, UK.
Search WWH ::
Custom Search