Civil Engineering Reference
In-Depth Information
A. Devgan and C. V. Kashyap. Block-based statistical timing
analysis with uncertainty. In
Proceedings of the IEEE/ACM Inter-
national Conference on Computer-Aided Design‚
pages 607-614‚
November 2003.
[DK03]
[DMP96]
F. Dartu‚ N. Menezes‚ and L. T. Pileggi. Performance compu-
tation for precharacterized CMOS gates with RC loads.
IEEE
Transactions on Computer-Aided Design of Integrated Circuits
and Systems‚
15(5):544-553‚ May 1996.
A. Daga‚ L. Mize‚ S. Sripada‚ C. Wolff‚ and Q. Wu. Automated
timing model generation. In
Proceedings of the. ACM/IEEE De-
sign Automation Conference‚
pages 146-151‚ 2002.
F. Dartu and L. T. Pileggi. Computing worst-case gate delays
due to dominant capacitance coupling. In
Proceedings of the
ACM/IEEE Design Automation Conference‚
pages 46-51‚ 1997.
[DP97]
Y. G. DeCastelo-Vide-e-Souza‚ M. Potkonjak. and A. Parker. Op-
timal ILP-based approach for throughput optimization using si-
multaneous algorithm/architecure matching and retiming. In
Pro-
ceedings of the ACM/IEEE Design Automation Conference‚
pages
113-118‚ 1995.
[DPP95]
S. W. Director and R. A. Rohrer. The generalized adjoint network
and network sensitivities.
IEEE Transactions on Circuit Theory‚
16(3):318-323‚ August 1969.
[DR69]
[DS94]
R. B. Deokar and S. S. Sapatnekar. A graph-theoretic approach to
clock skew optimization. In
Proceedings of the IEEE International
Symposium on Circuits and Systems‚
pages 1.407-1.410‚ 1994.
[DS95]
R. B. Deokar and S. S. Sapatnekar. A fresh look at retiming via
clock skew optimization. In
Proceedings of the ACM/IEEE Design
Automation Conference‚
pages 310-315‚ 1995.
[Dun92]
P. Duncan
et al.
Hi-PASS: A computer-aided synthesis system for
maximally parallel digital signal processing ASICS. In
Proceedings
of IEEE International Conference on Acoustics‚ Speech and Signal
Processing‚
pages V-605-608‚ 1992.
[DY96]
M. P. Desai and Y.-T. Yen. A systematic technique for verifying
critical path delays in a 300MHz Alpha CPU design using circuit
simulation. In
Proceedings of the ACM/IEEE Design Automation
Conference‚
pages 125-130‚ 1996.
J. G. Ecker. Geometric programming: methods‚ computations and
applications.
SIAM Review‚
22(3):338-362‚ July 1980.
[Eck80]