Hardware Reference
In-Depth Information
This is a standard SVG header. The width and height are set based on the
BeagleBone outline provided in the Adafruit library.
Fritzing requires the element to be within a layer called
board
.
Fritzing requires the color to be
#338040
and the layer to be called
boardoutline
. The units end up being 1/90 of an inch. That is, take the numbers
in the SVG code and divide by 90 to get the numbers from the System Reference
Manual.
The measurements are taken from the
BeagleBone Black System Reference Manual
,
as
shown in
Figure 9-16
.
