Civil Engineering Reference
In-Depth Information
EN 12696: 2000, Cathodic protection of steel in concrete.
EN 14487-1, Sprayed Concrete - Part 1: Definitions, Specifications and Conformity.
ENV 1504: Part 9: 1997, 'Products and systems for the protection and repair of
concrete structures - Definitions, requirements, quality control and evaluation of
conformity, Part 9: General principles for the use of products and systems', 1997.
Institution of Civil Engineers National Steering Committee
Recommendations for
the Inspection, Maintenance and Management of Car Park Structures
, ICE NSC
Report, 2005.
Schiessl, P., 'Draft Recommendation for repair strategies for concrete structures damaged
by reinforcement corrosion'.
Materials & Structures
, Vol 27, 1994, 415-436.
St John, D.A., Poole, A. W. and Sims, I.,
Concrete Petrography; A Handbook Of
Investigative Techniques
, London, Arnold, 1998.
Selected Test Standards called up in EN 1504-3
For a complete list see Davies and Robery, 2006
EN 1542, Measurement of bond strength by pull-off
EN 1766, Reference concretes for testing
EN 1770, Determination of coefficient of thermal expansion
EN 12190, Determination of compressive strength of repair mortar
EN 12617-4, Part 4: Determination of shrinkage and expansion
EN 13036-4, Surface characteristics - Test methods - Part 4: Method for measurement
of skid resistance of a surface: The pendulum test
EN 13057, Determination of resistance of capillary absorption
EN 13295, Determination of resistance to carbonation
EN 13395-1, Determination of workability - Part 1: Test of flow of thixotropic
repair mortars
EN 13395-2, Determination of workability - Part 2: Test for flow of grout or mortar
EN 13395-3, Determination of workability - Part 3: Test for flow of repair concrete
EN 13395-4, Determination of workability - Part 4: Application of repair mortar
overhead
EN 13396, Measurement of chloride ion ingress
EN 13412, Determination of modulus of elasticity in compression
EN 13529, Resistance to severe chemical attack
EN 13584, Creep in compression
EN 13687-1, Determination of thermal compatibility - Part 1: Freeze-thaw cycling
with de-icing salt immersion
EN 13687-2, Determination of thermal compatibility - Part 2: Thunder shower
cycling (thermal shock)
EN 13687-4, Determination of thermal compatibility - Part 4: Dry thermal cycling
EN 14629, Determination of chloride content in hardened concrete
EN 14630, Determination of carbonation depth in hardened concrete by the
phenolphthalein method
Note: In the above list of references, the European Standards are issued by national
standards bodies in the CEN member states. In the UK, this is the British Standards
Institution (BSI) and so all EN standards in the UK are prefixed with the term BS (i.e.
BS EN 1504). Voluntary standards are prefixed by BSI with the letters DD (i.e. DD
ENV 1504:1997).
