Civil Engineering Reference
In-Depth Information
th
World Conference on Earthquake Engineering, Acapulco, 23-28 June 1996, Paper
No. 2002
Diebold, J., Moore, K., Hale, T., Mochizuki, G. (2008): SEAOC Blue Book:
Seismic design recommendations 1959 to 2008. 14
De Buen, O. (1996): Earthquake resistant design. A view from the practice. 11
th
World Conference on
Earthquake Engineering, Beijing, 12-17 October 2008
DRAIN 2D (1975) A general purpose computing program for the dynamic
analysis of inelastic plane structures with user's guide. Report 73-6 and 73-22,
University of California
Elnashai, A.S., Papazoglou, A.J. (1997): Procedure and spectra for analysis of
RC structures subjected to strong vertical earthquake loads. Journal of Earthquake
Engineering, Vol. 1, No. 1, 121-155
Elnashai, A.S., He, L., Elgamal, A. (2004): Spectra for vertical earthquake
ground motions. 13
th
World Conference on Earthquake Engineering, Vancouver, 1-
6 August 2004, Paper No. 2309
Esteva, L. (2005): Earthquake engineering for seismic disaster mitigation in the
st
21
Century. World Conference on Disaster Reduction, Kobe, January, 2005
Fajfar, P., Krawinkler, H. (1997): Preface. Seismic Design Methodologies for
the Next Generation of Codes. Bled, 24-27 June 1997, Balkema, Rotterdam, IX-X
Fardis, M.N. (2004): Current development and future prospects of the European
code for seismic design and rehabilitation of buildings: Eurocode 8. 13
th
World
Conference on Earthquake Engineering, Vancouver, 16 August 2004, Paper No.
2025
FEMA 267 (1997): Interim Guidelines Advisory. Report No. SAC-96-03
Gao, M. (2003): New national seismic zoning map of China. 1999-2002 China
National Report on Seismology and Physics of Earth's Interior, Sapporo, 30 June-
11 July 2003
Ghosh, S.K. (2002): Seismic design provision in US codes and standards. A
look back and ahead. PCI Journal, January-February, 94-99
Gioncu, V. (2000): Influence of strain-rate on the behavior of steel members.
Behavior of Steel Structures in Seismic Areas, STESSA 2000 (eds. F.M.
Mazzolani and R. Tremblay), Montreal, 21-24 August 2000, 19-26
Gioncu, V. (2006): Advances in seismic codification for steel structures.
Costruzioni Metalliche, No. 6, 69-87
Gioncu, V. (2008): Structural design problems in the low-to-moderate seismic
regions. Part 1: Seismic risk and hazard; Part 2: Building's vulnerabiliy Seismic
Risk. Earthquakes in North-Western Europe. Liege, 11-12 September 2008, 249-
260, 261-272
Gioncu, V., Mateescu, G. (1997): Comparative parametrical studies concerning
the structure response for frames subjected to Banat and Vrancea ground motions
(in Romanian), INCERC Timisoara, Report A84/97
Gioncu, V., Mateescu, G. (1998a): Influence of vertical movements on behavior
of steel structures (in Romanian) INCERC Timisoare Report A93/98
Gioncu, V., Mateescu, G. (1998b): Study concerning the displacement criterium
for Banat ground motions (in Romanian), INCERC Report A92/98
Search WWH ::
Custom Search