Ground Motions and Structures - Earthquake Engineering for Structural Design - page 379

Ground Motions and Structures 379

No. 0366
Cusson, D, Larrard, F., Boulay, C., Paultre, P. (1996): Strain localization on
confined high-strength concrete columns. Journal of Structural Engineering, Vol. 122,
No. 9, 1055-1061
D'Aniello, M., Della Corte, G., Mazzolani, F.M., (2006): Steel buckling restrained
braces. In Seismic Upgrading of RC Buildings by Advanced Techniques (ed. F.M.
Mazzolani), Polimetrica, Milano, 179-223
Decanini, L., Mollaioli, F., Mura, A., Saragoni, R. (2004): Seismic performance of
masonry infilled RC frames. 13

th

World Conference on Earthquake Engineering,
Vancouver, 1-6 August 2006, paper No. 165
Della Corte, G., Landolfo, R., Mammana, O. (2003a): Fire resistance of MR steel
frames damaged by earthquakes. In Behavior of Steel Structures in Seismic Areas,
STESSA2003 (ed. F.M. Mazzolani), Napoli, 9-12 June 2003, Balkema, Lisse, 73-79
Della Corte, G., Landolfo, R., Mazzolani, F.M. (2003b): Post-earthquake fire
resistance of moment resisting steel frames. Fire Safety Journal, Vol. 38, No. 7, 593-
612
De la Llera, J.C., Chopra, A.K (1994a): Accidental torsion in buildings due to
stiffness uncertainty. Earthquake Engineering and Structural Dynamics, Vol. 23, 117-
136
De la Llera, J.C., Chopra, A.K (1994b): Accidental torsion in buildings due to base
rotational excitation. Earthquake Engineering and Structural Dynamics, Vol. 23, 1003-
1021
De la Llera, J.C., Chopra, A.K. (1995): Estimation of accidental torsion effects for
seismic design of buildings. Journal of Structural Engineering, Vol. 121, No. 1, 102-
114
De Matteis, G. (1998): The effect of cladding panels in steel buildings under seismic
actions. Ph.D. Thesis, Universita degli Studi di Napoli “Federico II”
De Matteis, G., Mistakidis, E.S. (2003): Seismic retrofitting of moment resisting
frames using low yield steel panels as shear walls. In Behavior of Steel Structures in
Seismic Areas, STESSA 2003, (ed. F.M. Mazzolani), Napoli, 9-12 June 2003,
Balkema, Lisse, 677-662
De Matteis, G., Mazzolani, F.M., Panico, S. (2006): Dissipative metal shear panels
for seismic design of steel frames. In Innovative Steel Structures for Seismic
Protection of Buildings. PRIN 2001 (ed. F.M. Mazzolani), Polimetrica, Milano, 15-79
FEMA 273 (1997): NEHRP Guidelines for the Seismic Rehabilitation of Buildings.
Federal Emergency Management Agency
FEMA 403 (2002): Appendix B. Structural steel and steel connection. Federal
Emergency Management Agency
Formasino, A., Mazzolani, F.M., Brando, G., De Matteis, G. (2006): Numerical
evaluation of the hysteretic performance of pure aluminimum shear panels. In
Behavior of Steel Structures in Seismic Areas, STESSA 2006 (eds. F.M. Mazzolani
and A. Wada), Yokohama,14-17 August 2006, Taylor & Francis, London, 211-217