Earthquakes and Ground Motions - Earthquake Engineering for Structural Design - page 288

Elnashai, A.S., Papazouglou, A.J. (1997): Procedure and spectra for analysis of
RC structures subjected to strong vertical earthquake loads. Journal of Earthquake
Engineering, Vol. 1, No. 1, 121-155
Elnashai, A.S., Bommer, J.J., Martinez-Pereira, A. (1998): Engineering
implications of strong-motion records from recent earthquakes. 11

th

European

Conference on Earthquake Engineering, Paris, 6-11 September 1998
Erdik, M. (1995): Developments on empirical assessment in the effects of
surface geology on strong ground motion. In 10 th European Conference on
Earthquake Engineering, Wienna, 8 August-2 September 1994, Balkema,
Rotterdam, Vol. 4, 2593-2598
Erkay, C., Karaesmen, E. (1996): Site effects and considerations for seismic
code renewals. 11 th World Conference on Earthquake Engineering, Acapulco, 23-
28 June 1996, Paper No. 1516
Erkay, C., Karaesmen, E., Karaesmen, Er. (1998): A study on spatial variability
of seismic motion through planar spectrum concept. 11

th

European Conference on
Earthquake Engineering, Paris, 6-11 September 1998, T1-88
Erkay, C., Karaesmen, En., Karaesmen, Er. (2002): Significance of spatial
variation of seismic motion and consequences affecting design procedures. 12 th
European Conference on Earthquake Engineering, London, 9-13 September 2002,
Paper No. 130
Faccioli, E. (1996): On the use of engineering seismology tools in ground
shaking scenarios. 11th World Conference on Earthquake Engineering, Acapulco,
23-28 June 1996
Faccioli, E., Vanini, M., Frassine, L. (2002): Complex site effects in earthquake
ground motion, including topography. 12

th

European Conference on Earthquake
Engineering, London, 9-13 September 2002, Paper No. 844
FEMA, Session 5 (2005): Earthquake hazard and emergency management.
Characteristics of earthquakes: magnitude, intensity and energy. Courses
http://training.fema.gov/EarthquakeEM/.../Session2005/...pdf
Filiatrault, A. (1996): Elements de Genie Parasismique et le Calcul Dynamique
des Structures. Editions de l'Ecole Polytechnique de Montreal
Fu, Q., Menun, C. (2004): Seismic-environment-based simulation of near-fault
ground motions. 13

th

World Conference on Earthquake Engineering, Vancouver, 1-
6 August 2004, Paper No. 322
Gangopadhyay, A., Talwani, P. (2003): Symptomatic features of intraplate
earthquakes. Seismological Research Letters, Vol. 74, No. 6, 863-883
Gioncu, V. (2000): Design criteria for seismic resistant steel structures, in
Seismic Resistant Steel Structures (eds. F.M. Mazzolani and V. Gioncu), CISM
Courses, Udine, Springer Wien, 19-99
Gioncu, V. (2006): Advances in seismic codification for steel structures.
Costruzioni Metalliche, No. 6, 69-87
Gioncu, V. (2008): Structural problems in the low-to-moderate seismic regions.
Part 1: Seismic risk and hazard. Part 2: Building's vulnerability. Seismic Risk,
Liege 11-12 September 2008, 249-260, 261-272
Gioncu, V., Mazzolani, F.M. (2002): Ductility of Seismic Resistant Steel
Structures. Spon Press, London