Civil Engineering Reference
In-Depth Information
8. Blaisdell, F. W., and Mansen, P. W., ''Energy Loss of Pipe Junction,''
Journal of the Irrigation
and Drainage Division
, ASCE, pp. 59-78, September 1967.
9. Hudson, H. E., Jr.,
Water Clarification Process: Practical Design and Evaluation
, Van Nos-
trand Reinhold, New York, 1981.
10. McMann, J. S., ''Mechanics of Manifold Flow,''
Trans. ASCE,
pp. 119-1103, 1954.
11. Ball, J. W., ''Cavitation Design Criteria,'' Control of Flow in Closed Conduits,
Proceedings
of the Institute
held at Colorado State University, J. P. Tullis (ed.), August 1970.
12. Tullis, J. P.,
Cavitation Guide for Control Valves.
U.S. Nuclear Regulatory Commission,
NUREG / CR-6031, Washington, DC, April 1993.
13. Tullis, J. P.,
Hydraulics of Pipelines, Pumps, Valves, Cavitation, Transients.
John Wiley &
Sons, New York, 1989.
14. Skousen, P. L.,
Valve Handbook,
McGraw-Hill, New York, 1998.
15. Karrassic, I. J., Krutzch, W. C., Fraser, W. H., and Messina, J. P., (eds.),
Pump Handbook,
2nd ed., McGraw-Hill, New York, 1985.
16. Sanks, R. L.,
Pumping Station Design,
2nd ed., Butterworth-Heineman, Boston.
17. Rutschi, K., ''Die fleiderer-saugzahl als gutegrad der saugfahigkeit von kreiselpumpen,''
Schweizerische Bauzeitung, No. 12, Zurich, 1960.
18. ASCE Task Force, ''Friction Factors in Open Channels,''
Journal of the Hydraulics Division
,
ASCE, pp. 97-143, March 1963.
19. Daugherty, R. L., and Franzini, J. B.,
Fluid Mechanics with Engineering Application
, 6th ed.,
McGraw-Hill, New York, 1965.
20. Henderson, F. M.,
Open Channel Flow
, Macmillan, New York, 1966, p. 522.
21. Soliman, M. M., and Tinney, E. R., ''Flow Around 180
Bends in Open Rectangular Chan-
nels,''
Journal of Hydraulics Division, ASCE
, pp. 893-908, July 1968.
22. Camp, T. R., and Graber, S. D., ''Dispersion Conduits,''
J. San. Eng. Div.,
ASCE, Vol. 94,
pp. 31-39, February 1968.
23. Chao, J. L., and Trussel, R. R., ''Hydraulic Design for Flow Distribution Channels,''
ASCE,
J. Env. Engineering,
Vol. 106, No. 2, p. 321, April 1980.
24. Skousen, Phillip L.,
Valve Handbook,
McGraw-Hill, New York, 1997.
25. Grant, D. M., and Dawson, B. D.,
Isco Open Channel Flow Measurement Handbook,
5th ed.,
ISCO, Lincoln, NE, 1997.
26. U.S. Dept. of Interior, Bureau of Reclamation,
Water Measurement Manual,
Water Resources
Technical Publication, 2nd ed., Denver, 1967.
27. Parmakian, John, ''Waterhammer Analysis,'' Dover Publications, New York, 1986.
28. USEPA.
Guidance Manual for Compliance with the Filtration and Disinfection Requirements
for Public Works Systems Using Surface Water Sources.
Malcolm Pirnie, Inc. and HDR
Engineering, Inc. for USEPA Science and Technology Branch. Contract No. 68-01-6989
(1990), printed by AWWA, 1991.
SUPPLEMENTARY READING
Hydraulic Institute, ANSI / HI 9.1-9.5-2000 American National Standard for Pumps—General
Guidelines for Types, Definitions, Application, Sound Measurement and Decontamination,
Parsippany, NJ, www.pumps.org.
Tullis, J. P., and Marachner, B. W., ''Review of Cavitation Research or Valves,''
Journal of the
Hydraulics Division, ASCE
, pp. 1-16, June 1968.
