Distribution System Corrosion: Monitoring and Control - Public Water Systems - page 720

16. ASTM D2688-83, Method B, ''Standard Test Methods for the Corrosivity of Water in the
Absence of Heat Transfer (weight loss protocol),'' Philadelphia, 1983a.
17. ASTM G1-81, ''Recommended Practice for Preparing, Cleaning and Evaluating Corrosion
Test Specimens,''ASTM, Philadelphia, 1981.
18. ASTM G46-76, ''Recommended Practice for the Examination and Evaluation of Pitting Type
Corrosion,'' ASTM, Philadelphia, 1976.
19. ASTM D2688-83, ''Method C, Standard Test Methods for the Corrosivity of Water in the
Absence of Heat Transfer (machined nipple test),'' Philadelphia, 1983b.
20. Reiber, S. H., Ferguson, J. F., and Benjamin, M. M., ''An Improved Method for Corrosion
Rate Determination by Weight Loss,'' JAWWA, 1988.
21. Williams, S. M., Ainsworth, R. G., and Elvidge, A. F., ''A Method of Assessing the Corro-
sivity of Waters Towards Iron,'' Water Research Centre Publication, Swindon, UK, 1984.
22. Temkar, P., ''Development of a Pipe Loop System for determining Effectiveness of Corrosion
Control Chemicals in Potable Water Systems,'' USA-CERL Technical Report N-88 / 12, 1988.
23. Temkar, P., Schloze, R. J., Maloney, S. W., and Neff, C. H., ''Pipe Loop System for Evaluating
Effects of Water Quality Control Chemicals in Water Distribution Systems,'' Proc, 15th An-
nual AWWA WQTC, Baltimore, MD, 1987.
24. Reiber, S. H., ''The Electrochemistry of Copper Plumbing Surfaces,'' JAWWA, Vol. 81, p.
114.
25. Reiber, S. H., ''Galvanic Stimulation of Lead-Tin Solder Corrosion,'' JAWWA, Vol. 83, No.
7, p. 97.
26. Rohrback, G. H., ''Determination of Corrosion Rates in a Variety of Different Processes by
Means of the Corrosometer,'' Proc. of Sixth Regional Conf. of NACE, Long Beach, CA, 1956.
27. Cooper, G. L., ''Proper Electrical Resistance Corrosion Probe Span Selection,'' Electrochem-
ical Techniques for Corrosion Engineering (R. Baboian, ed.), NACE, Houston, 1986.
28. Dean, S. W., France, W. D., and Ketcham, S.J., ''Electrochemical Methods of Testing,'' in
Handbook on Corrosion Testing and Evaluation, John Wiley & Sons, New York, 1971.
29. Dean, S. W., Electrochemical Techniques for Corrosion Testing (R. Baboian, ed.), NACE,
Houston, 1977.
30. ASTM G 59, ''Standard Practice for Conducting Potentiodynamic Polarization Resistance
Measurements,'' ASTM Philadelphia, 1959.
31. Mansfeld, F., ''Polarization Resistance Measurements—Experimental Procedure and Evalu-
ation of Test Data,'' in Electrochemical Techniques for Corrosion (R. Baboian, ed.), NACE,
Houston, 1977.
32. Silverman, D. C., ''Primer on the AC Impedance Technique,'' in Electrochemical Techniques
for Corrosion (R. Baboian, ed.), NACE, Houston, 1986.
33. Kendig, M. W., and Mansfeld, F., ''Evaluation of Protective Coatings with Impedance Mea-
surements,'' Proc. of the Ninth Int. Congress on Metals Corrosion, Toronto, 1984.
34. EG&G, Princeton Applied Research, ''Basics of AC Impedance Measurements,'' Application
Note, Princeton Applied Research Inc., Princeton, NJ, 1989.
35. Hladky, K., and Dawson, J. L., ''The Measurement of Corrosion Using Electrochemical
Noise,'' 1981.
36. Dawson, J. L., and Uruchurtu, J., ''Noise Analysis of Pure Aluminum under Different Pitting
Conditions,'' Electrochemical Methods in Corrosion Research (M. Dupart, ed.), Ranstech
Publications, Switzerland, 1986.
37. Wagner, C., and Traud, W., Z. Elektrochem 44:391, 1938.
38. Stern, M., and Geary, A. L., Journal of Electrochemistry Soc., 104:56, 1957.
39. Butler, J. A., ''Kinetic Theory of Reversible Oxidation Potentials at Inert Electrodes,'' Trans.
Farady Soc., 19:729, 1924.