Hemicelluloses at Interfaces: Some Aspects of the Interactions - The Nanoscience and Technology of Renewable Biomaterials - page 171

Rodahl, K., Ho ok, F., Krozer, A., Brezezinski, P. & Kasemo, B. (1995) Quartz crystal
microbalance setup for frequency and Q-factor measurements in gaseous and liquid
environments. Rev. Sci. Instrum . 66, 3924-30.
Schaub M., Wenz G., Wegner G., Stein A. & Klemm D. (1993) Ultrathin films of
cellulose on silicon wafers. Adv. Mater . 5, 919-22.
Sch onberg, C., Oksanen, T., Suurnakki, A., Kettunen, H. & Buchert, J. (2001) The impor-
tance of xylan for the strength properties of spruce kraft pulp fibres. Holzforschung
55(6), 639-44.
Sihvonen, A.-L., Sundberg, K., Sundberg, A. & Holmbom, B. (1998) Stability and
deposition tendency of colloidal wood resin. Nord. Pulp Paper Res. J ., 13(1), 64-7.
Sj ostr om, E. (1993) Wood Chemistry: Fundamentals and Applications . 2nd edn. Aca-
demic Press, San Diego, CA.
Sundberg, K., Thornton, J., Ekman, R. & Holmbom, B. (1994a) Interactions between
simple electrolytes and dissolved and colloidal substances in mechanical pulp. Nord.
Pulp Pap. Res. J . 9(2), 125-8.
Sundberg, K., Thornton, J., Petterson, C., Holmbom, B. & Ekman, R. (1994b) Calcium-
induced aggregation of dissolved and colloidal substances in mechanical pulp suspen-
sions. J. Pulp Pap. Sci . 20(11), J317-J321.
Sundberg, K., Thornton, J., Holmbom, B. & Ekman, R. (1996a) Effects of wood polysac-
charides on the stability of colloidal wood resin. J. Pulp Pap. Sci . 22(7), J226-J230.
Sundberg, A., Sundberg, K., Lillandt, C. & Holmbom, B. (1996b) Determination of
hemicelluloses and pectins in wood and pulp fibres by acid methanolysis and gas
chromatography. Nord. Pulp Paper. Res. J . 11(4), 216-19.
Tammelin, T., Merta, J., Johansson, L.-S. & Stenius P. (2004) Viscoelastic properties of
cationic starch adsorbed on quartz studied by QCM-D. Langmuir 20(25), 10900-9.
Tammelin, T. (2006a) Surface Interactions in TMP Process Waters. PhD Thesis, Helsinki
University of Technology, Laboratory of Forest Products Chemistry reports A4, Espoo,
Finland. http://lib.tkk.fi/Diss/2006/isbn9512284839
Tammelin, T., Saarinen, T., Osterberg, M. & Laine J. (2006b) Preparation of Langmuir-
Blodgett - cellulose surfaces by using horizontal dipping procedure. Application for
polyelectrolyte adsorption studies performed with QCM-D. Cellulose 13(5), 519-35.
Tammelin, T., Johnsen, I.A., Osterberg, M., Stenius, P. & Laine, J. (2007) Adsorption
of colloidal extractives and dissolved hemicelluloses on thermomechanical pulp fiber
components studied by QCM-D. Nord. Pulp Paper. Res. J . 22(1), 93-101.
Teleman, A., Larsson, P.T. & Iversen, T. (2001) On the accessibility and structure of
xylan in birch kraft pulp. Cellulose 8(3), 209-15.
Thornton, J., Ekman, R., Holmbom, B. & Orsa, F. (1994) Polysaccharides dissolved
from Norway spruce in thermomechanical pulping and peroxide bleaching. J. Wood
Chem. Technol . 14, 159.
Torii, A., Sasaki, M., Hane, K. & Okuma, S. (1996) A method for determining the
spring constant of cantilevers for scanning probe microscopy. Meas. Sci. Technol .

7(2), 179-84.
Voinova, M., Rodahl, M., Jonson, M. & Kasemo, B. (1999) Viscoelastic acoustic
response of layered polymer films at fluid-solid interfaces: continuum mechanics

approach, Phys. Scr . 59(55), 391-6.