Biomedical Engineering Reference
In-Depth Information
By substituting eqn (A.8) and (A.9) into eqn (A.7):
r
v
i
t
v
o
t
d
o
ΒΌ
d
i
(A
:
10)
d
n
3
r
4
n
g
|
1
After simplification of eqn (A.10), we derived eqn (A.1).
NOTE: v
o
, which represents the translational velocity, can be set in the fab-
rication parameter. On the other hand, v
i
is variable across machine/extruder
type, which has to be calculated separately.
Acknowledgements
We would like to acknowledge support
from the ARC linkage funds
LP110200082 and LP100200084.
References
1. M. A. Woodruff, C. Lange, J. Reichert, A. Berner, F. Chen, P.
Fratzl, J.-T. Schantz and D. W. Hutmacher, Mater. Today, 2012, 15,
430-435.
2. T. Albrektsson and C. Johansson, Eur. Spine J., 2001, 10, S96-S101.
3. M. A. Woodruff and D. W. Hutmacher, Prog. Polym. Sci., 2010, 35,
1217-1256.
4. L. Suggs, S. Moore and A. Mikos, Synthetic Biodegradable Polymers for
Medical Applications, ed. J. E. Mark, Springer, New York, 2007, pp. 939-950.
5. C. X. F. Lam, D. W. Hutmacher, J.-T. Schantz, M. A. Woodruff and
S. H. Teoh, J. Biomed. Mater. Res., Part A, 2009, 90, 906-919.
6. A. Peister, M. A. Woodruff, J. J. Prince, D. P. Gray, D. W. Hutmacher and
R. E. Guldberg, Stem Cell Res., 2011, 7, 17-27.
7. N. Bock, M. A. Woodruff, D. W. Hutmacher and T. R. Dargaville, Poly-
mers, 2011, 3, 131-149.
8. E. Sachlos, J. T. Czernuszka, S. Gogolewski and M. Dalby, Eur. Cells
Mater., 2003, 5, 29-40.
9. W. A. Inc., Report of Additive manufacturing and 3D printing, http://
wholersassociates.com/press56.htm.
10. D. W. Hutmacher, M. Sittinger and M. V. Risbud, Trends Biotechnol.,
2004, 22, 354-362.
11. F. P. W. Melchels, M. A. N. Domingos, T. J. Klein, J. Malda, P. J. Bartolo
and D. W. Hutmacher, Prog. Polym. Sci., 2012, 1079-1104.
12. M. Domingos, D. Dinucci, S. Cometa, M. Alderighi, P. J. Bartolo and
F. Chiellini, Int. J. Biomater., 2009, Article ID: 239643.
13. I. Zein, D. W. Hutmacher, K. C. Tan and S. H. Teoh, Biomaterials, 2002,
23, 1169-1185.
.
Search WWH ::
Custom Search