Databases Reference
In-Depth Information
Figure 10-2.
Changing KVM switch DNS server addresses
Changing Cisco Catalyst 4948 Networking
Connect a serial cable from the Cisco switch console to a laptop using the RJ45 to DB9 serial cable included with
your Exadata package. Once you've got a serial connection, connect at 9600 baud, 8 bits, no parity, 1 stop bit, and no
handshake.
Once connected, complete these steps:
Change to
enable
mode using the following command:
1.
Switch> enable
Switch#
Enter configuration mode by entering the
configure terminal
command:
2.
Switch # configure terminal
Enter configuration commands, one per line.End with CTRL/Z.
Swich(config)#
3.
If you wish to, for example, change your Name Server IP address, enter the following:
Switch(config)# ip name-server 11.11.1.255
Switch(config)# ip default-gateway 10.16.1.1
Switch(config)# interface vlan1
Switch(config)# ip address 10.16.1.121 255.255.255.0
To save changes, enter
end
and commit your changes by typing
write memory
:
4.
Switch(config)# end
*Aug 27 18:01:26.155:%SYS-5-CONFIG_I:Configured from console by console
Switch # write memory
Search WWH ::
Custom Search