Databases Reference
In-Depth Information
As the storage cell boots, the rescue procedure will restore the remaining software from the
CELLBOOT USB drive and bring your storage cell to a semi-operational status. One thing
you will notice is that during this phase of the procedure, Oracle will run its cell validation
code in
reimage_boot
mode, as displayed in Figure
8-11
.
Figure 8-11.
Running cell validation in reimage_boot mode
11.
When the reimage process is complete, the cell should reboot. Your storage cell may
power off during this phase of the rescue process; don't panic, simply log in to your ILOM
console and power the cell on, as displayed in Figure
8-12
.
Figure 8-12.
Powering on your storage cell from the ILOM web interface
As the storage cell is started, it will perform a number of processes to return the cell to
an operational state. You will notice that on its first pass, your CELLSRV software will not
start, as shown in Figure
8-13
. This is normal at this state of the rescue process.
Search WWH ::
Custom Search