Administration and Diagnostics Utilities - Oracle Exadata Recipes: A Problem-Solution Approach - page 183

Enter configuration mode by entering the configure terminal command:
Switch # configure terminal
Enter configuration commands, one per line.End with CTRL/Z.
Swich(config)#
If you wish, for example, to change your Name Server IP address, enter the following:
Switch(config)# ip name-server 11.11.1.252
To save changes, enter end and save changes by typing write memory:
Switch(config)# end
*Aug 27 18:01:26.155:%SYS-5-CONFIG_I:Configured from console by console
Switch # write memory
Building configuration ...
How It Works
The embedded Cisco switch inside the Exadata rack can be connected to via the Cisco RJ45 to DB9 serial cable
included with your Exadata parts shipment. The switch has a very minimal configuration at time of installation
and should typically not require modifications unless you have changed network information inside your database
machine. You can use the Cisco's Command Line Interface to change configuration information once connected.