Active Magnetic Regeneration - Magnetocaloric Energy Conversion: From Theory to Applications - page 161

92. Engelbrecht K, Tu š ek J, Nielsen KK et al (2013) Improved modelling of a parallel plate
active magnetic regenerator. J Phys D Appl Phys 46:255002
93. Dai W, Shen BG, Li DX et al (2000) Application of high-energy Nd-Fe-B magnet in the
magnetic refrigeration. J Magn Magn Mater 218:25 - 30
94. Peksoy O, Rowe A (2005) Demagnetizing effects in active magnetic regenerators. J Magn
Magn Mater 288:424 432

95. Smith A, Nielsen KK, Christensen DV et al (2010) The demagnetizing eld of a nonuniform
rectangular prism. J Appl Phys 107:103910
96. Christensen D, Nielsen KK, Bahl CRH et al (2011) Demagnetizing effects in stacked
rectangular prisms. J Phys D Appl Phys 44(21):215004
97. Bj

-

rk R, Bahl CRH (2013) Demagnetization factor for a powder of randomly packed
spherical particles. Appl Phys Lett 103:102403
98. Bouchard J, Nesreddine H, Galanis N (2009) Model of a porous regenerator used for
magnetic refrigeration at room temperature. Int J Heat Mass Transf 52(5

ø

6):1223 1229

- -

uence of demagnetizing effects on the
performance of active magnetic regenerators. J Appl Phys 112(9):094905
100. Lips ø KW, Nielsen KK, Christensen DV et al (2011) Measuring the effect of
demagnetization in stacks of gadolinium plates using the magnetocaloric effect. J Magn
Magn Mater 323:3027 - 3032
101. Tu š ek J, Kitanovski A, Zupan S et al (2013) A comprehensive experimental analysis of
gadolinium active magnetic regenerators. Appl Therm Eng 53:57 - 66
102. Chang ZC, Chen PH (1998) Flow channeling effect on a regenerator ' s thermal performance.
Cryogenics 38(2):191

99. Nielsen KK, Smith A, Bahl CRH et al (2012) The in fl

196
103. Nemec D, Levec J (2005) Flow through packed bed reactors: 1. single-phase

-

fl ow. Chem Eng

6957
104. du Toit C (2008) Radial variation in porosity in annular packed beds. Nucl Eng Des 238
(11):3073

Sci 60(24):6947

-

3079
105. Hsu CH (2005) Dynamic modeling of convective heat transfer in porous media. Taylor &
Francis, New York
106. Heggs PJ, Burns D (1988) Single-blow experimental prediction of heat transfer coef cients: a
comparison of four commonly used techniques. Exp Therm Fluid Sci 1:243

-

251

-

107. Nielsen KK, Engelbrecht K, Bahl CRH (2013) The in ow maldistribution on the

performance of inhomogeneous parallel plate heat exchangers. Int J Heat Mass Transf
60:432 - 439
108. Jensen JB, Bahl CRH, Engelbrecht K et al (2011) Analysis of single blow effectiveness in
non-uniform parallel plate regenerators. Int J Heat Mass Transf 54:4746 - 4751
109. Nielsen KK, Engelbrecht K, Christensen DV et al (2012) Degradation of the performance of
microchannel heat exchangers due to flow maldistribution. Appl Therm Eng 40:236 - 247
110. Lozano JA, Engelbrecht K, Bahl CRH et al (2013) Performance analysis of a rotary active
magnetic refrigerator. Appl Energ 111:669 - 680
111. Nielsen KK, Nellis GF, Klein SA (2013) Numerical modeling of the impact of regenerator
housing on the determination of Nusselt numbers. Int J Heat Mass Transf 65:552

fl uence of fl

560
112. Engelbrecht K, Nielsen KK, Bahl CRH et al (2013) Material properties and modeling
characteristics for MnFeP 1 − x As x materials for application in magnetic refrigeration. J Appl
Phys 113(17):173510
113. von Moos L, Nielsen KK, Engelbrecht K et al (2014) Experimental investigation of the effect
of thermal hysteresis in rst order material MnFe(P, As) applied in an AMR device. Int J
Refrig 37(1):303

-

306
114. Basso V, Sasso CP, Bertotti G et al (2006) Effect of material hysteresis in magnetic
refrigeration cycles. Int J Refrig 29:1358

-

1365
115. von Moos L, Bahl CRH, Nielsen KK et al (2014) Preisach approach to modeling partial
phase transitions in the

-

rst order magnetocaloric material MnFe(P, As). Phys B

435:144 - 147