Graphics Reference
In-Depth Information
Figure 13.4
The Channel EQ's high-pass filter on the interface.
Figure 13.5
The Channel EQ settings in the Inspector.
We've cleaned up the low end of the audio, but the sound is far from ideal. If you listen closely, you can hear an
annoying buzzing sound as well as a lot of background noise. We can use the Channel EQ plug-in that we've
already applied to remove the buzzing sound. A parametric filter will allow us to pinpoint the buzz's particular
frequency and reduce it.
1.
To activate the parametric filter, make sure Scene 17 Slate 31 Take 2 is still selected, and check the Peak
1 On/Off check box in the Inspector's Channel EQ settings or click on the third button across the top of the
Channel EQ's interface. The buzz's frequency that we want to lower is around 2 Khz. Drag the Peak 1 Fre-
